Jump to content
Security Installer Community

Leaderboard

Popular Content

Showing content with the highest reputation on 22/07/19 in all areas

  1. If you've no preconception of how things should work.... it might just make sense ?
    2 points
  2. OK see how you get on, they are not horrendous, but they are not fun to program
    1 point
  3. All of my wiring is terminated with bootlace ferrules! I wouldn't do it any other way! And yes, speaker wire, it was all I had to hand and didn't know if I should have used the alarm wire for this also. I suppose at the end of the day it is after all a speaker connected with speaker wire so I was doing what common sense told me Trawl nets are another work of art that sometimes look way to good to drag through the sea or get torn up on rocks and wrecks.
    1 point
  4. If a lower graded i&has part is fitted to an i&has then it lowers the overall grade however fitting an unrelated switch to signal something else isn't i&has
    1 point
  5. Using all grade 3 kit and installing it to grade 3 is fine but you cant call it grade 3, in the same way as if we installed a grade 3 system and put a grade 2 door contact on it, it then becomes grade 2. Not a problem unless something happens and the insurer wants to see the cert
    1 point
  6. Smoke detection in yhis case would be classed as ancillary devices and would not need to be disconnected. However they are not the same as a 5839 fire alarm. But i have smokes and Co on my own alarm
    1 point
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.