Jump to content
Security Installer Community

Leaderboard

Popular Content

Showing content with the highest reputation on 17/04/20 in all areas

  1. I’d take a good guess on your code being 1995 or 1959 ??
    2 points
  2. I'm currently working on a virtual RIO module as part of something that I want for my own home automation. I'll sell this for the bigger panels like the FX100+ and GD96 upwards, as they have lots of links available. The virtual RIO sits on the RS485 bus and will consume 4 addresses, giving 16 outputs and 32 inputs in virtualised form. On my own system, I currently have lots of outputs programmed to switch lights, heating and garage door Etc, but I either control them from the app, or guard codes. I've been looking at OpenHab, so would like a way for linked zones with virtualised outputs to provide the OpenHab 'things' with status update calls over IP. There shouldn't be any reason that the virtualised RIO cannot send the calls to any other controller, it's just a matter of the appropriate protocol. This is basically what some of these other hardware vendors do for Vista, but instead of the compatible device, they physically hook into the existing zones and outputs wiring. This would cause an issue for the Galaxy, as it uses balanced circuits, so any external influence on the circuits would cause problems. The virtual RIO will only need connected to the bus and an Ethernet connection, so a simple addition. Since the inputs and outputs are programmable, it's entirely up to the person who configures the system as to the level of control allowed. An input call to the virtual RIO could set a zone as active and in turn fire another physical panel output, or set the system. Basically anything that the panel is capable of. For me, I think the timers and sequence based logic is limited on the Galaxy, and that's where the home automation excels.
    2 points
  3. Good Evening All I was shared the following link. I think it may be useful to many of us here. https://petition.parliament.uk/petitions/310515 Please Sign and Share
    1 point
  4. Call the number on the sticker and arrange for an engineer to come and fix it after youve finished painting
    1 point
  5. Well nice for you lot Majority here have to keeps lock on constantly Except my big black Ghanaian friend who snoozes with his front door open , I don't think no one wants mess with him
    1 point
  6. Looks like he's playing with lifts again.... if all goes wrong he'll be proper shafted.
    1 point
  7. OP - Sooner or later the sub is going to ring to play back or export footage chance are you'll having forgotten who the tat works,even if they pay you attend site & do it you'll still have to faff.... rip it out & use your kit
    1 point
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.