Everything posted by norman
-
Very helpful guide
No, that's because you live in the West Midlands, they are guns.
-
Very helpful guide
Has your watch stopped? In 2001.
-
friendly hello :)
Hello and welcome, There is a slightly more lively trade side with lots more information etc. Have a read of the rules and apply for trade membership
-
Pulsar 10 - Manufacturers site? Manual?
It's an old Abacus panel, possibly in need of a service and upgrade.
-
Scantronic 9800
As above these have a habit of the NVM going faulty, needs to be reprogrammed from scratch, and fully testing to ensure it doesn't spaff the programming again on power loss.
-
DITEC automatic gate equipment
What could possibly go wrong...
-
New amateur seeking a bit of advice.
Yes, and also so they can't set the alarm with the doors open.
-
Electrician converting to intruder alarm engineer
Anywhere.
-
Use ADT alarm as stand alone system
Hi Ben you have an ADT powemax by the sounds of it. It will need some parameters re programming as you guessed and this can be done by any competent company. If you post your general location someone on here may be able to assist further. The system will have an engineers code unique to ADT but this can also be defaulted/changed. The devices are also unique to ADT so if you wanted to add later then your options are limited to second hand or ADT My suggestion would be to get a local, reputable and recommended company to have a look, I'd also advise you have it under some sort of maintenance agreement, this could save you in the long run. Finally you may also have a dummy external bell, so this is worth checking too.
-
Oldest Panel
Lol, I'm sure there'll be a blue plaque somewhere outside.
-
Oldest Panel
Talking of vets I used to look after the James Heriot museum when I was @ Wares.
- Oldest Panel
-
Oldest Panel
-
Electrician converting to intruder alarm engineer
Clockwise here and I'm left handed. Fuck you OCD.
-
Electrician converting to intruder alarm engineer
Same bend the ends over for a better grip then trim to size. Also worked really well with ceiling grid wire, used to get rolls from the skips and do metres at a time and cut to length for fish wires.
-
Galaxy flex install coming up
I installed classic galaxy for years and always used the keypad, never had an issue just used to carry one on a flylead and find somewhere comfortable to do it. Even better doing it on the bench in the comfort of your office.
-
Galaxy flex install coming up
How big is the system?
-
Anyone know make/model of PSTN communicator
Std business practice for years from many...
-
New amateur seeking a bit of advice.
-
Whp needs a alarm nowadays with this
Ah, 'to' the UK, my bad.
-
Whp needs a alarm nowadays with this
Lol Didn't who emigrate?
-
Whp needs a alarm nowadays with this
It's spelt wrong (for the UK)
-
fob reader advise
Yup, the ones you don't want though, only cause pain in the longrun.
-
fob reader advise
You know it makes sense...
-
Old Veritas 8 alarm panel, lost manual, how to setup PART set Zones
As above, @ 20 years for a £40 panel is excellent value. Time to get your hand in your pocket.