MrHappy

I have a chinky tat one than is slung in the van https://www.ebay.co.uk/itm/303417798295?hash=item46a51c2e97:g:QZsAAOSwz-dgjDuF

What colour is his horse ?

no, its a common misconception that 1 controls panel is going power anything you can think of putting on it

ah why ? I assume your naïve enough to expect to power all this from a single control panel ?

disconnect all the wiring inside the panel link from 0v to bell tamper inside the controls

remove every device off the alarm, link out every zone, link the bell tamper out, holding down the panel spring tamper.... can you exit engineering ??

@Honda3 find a local tame alarm man, get them to price via email to replace the controls, battery & external bell. they'll measure all the cables & currents if they've 1/2 a brain... I'd assume your cables are stapled under the carpets ? Replace the fuse & tread on every inch of carpet where a cable might be lurking ?

Don't forget the Mitcheldean witch trials- Any strange bleep from a powered down alarm, needs the services of an exorcist.. I used to be medium, but as I got fatter my shirts are now all large.

probably a kidde carbon monoxide detector ?

anyone got the no. for derek acorah ? I know he;s dead but that should not be a problem....

Thank you taking the effort of joining our forum.... It assumes me & probably a few other members that you've powered down an intruder alarm as you've a battery powered smoke detector or similar with a low battery chirp :)

its a double poled panel...

a duff battery won't make the bell tamaper go off..

just sorting out the swag pile, I wanted a 2nd hdd for works cctv's & got carried away & now have more than a dozen I have some used PSU's but not the correct one to repair a wbox branded hik nvr (£58 for a psu) so binned it & held onto the toshiba 2tb I've wheelie bin full of dvr cases & knacked speed domes, I'm also hoping I've case fan which is suitable for a HP switch as mine is quite LOUD

I have pile of WD Green Power HDD, pulled from some vista DVR's popping them into a windows machine, a handful are recognized with "disk management" but most ain't WD drive utilities does not recognise on of the working drives- However a Hik NVR will recognise the drive(s) & store data on it ? odd...

its an IP address on your internal network....

Do you have both resistors & cables in terminals ?

Fully programmable from keypad ?

reading the article, The police later told the couple that four photos depicting category B child abuse - the second-most-serious kind - had been uploaded to an online chat site a year ago. Information passed to the National Crime Agency suggested it had come from their IP address. 1 year after the event the police turn up ? They appear to have an adsl router & I doubt they have a fixed IP Is it them, a nonce in the flat next door on their wifi or nonce with a fake IP... I reckon the later ?

? the plastic cases, buttons ect will all be your design either moulded in house or produced by a subcontractor components, transformers, speaker ect RS Components ? (I expect texecom buy else where & much cheaper) Its very unlikely anyone is going to make a business from making a control panel, start with something much simpler speaker, joint box, door contact

I'd give 'em a new system provide they have maintenance & out the yale tat on ebay or in the bin if don't sell...

well it could be worse, at least your not Australia... well come to TSI

Same, however but I've got one plugged in at the office Internet off at 13:15 ish few mins later Ajax has reported the failure 15:15 ish Arc have reported the failure (is only G2, but hey...) Internet back on 2am the following, Ajax reported Arc doesn't report the the restore From my limited play with the product it make something like an enforcer seem dated, I'm an alarm man, not an app man, I don't think it the right thing for my co

Is it an ADT UK product ?

Its TSI's tame idiot Mr Happy..... err hang on that me!