MrHappy

I suspect you'll have issue with your texecom radio stuff, get a man to do it for you & he'll have to sort the faults out

buy a cheapo acer laptop & throw it away when it breaks...

rip it out & put a decent lighting controller it, (but nobodys make anything to compete with it ?) take the cover off & walk test it (they go opaque with age swap sensor around to see it the fault follows work the pots back & forth to see if the lux sense are at a working level swap a sensor with a new one fault finding is 2 man job after hours, it cheap to put the lights on timer

IIRC the IP rating refers to the electronics ? the E (Economy version) didn't have has rubber gasket seal on the internal plastic cover

no, another young lad DD will be removing tat however by the time it comes off the wall its had 20yrs of sunshine, rain & birdshit on the plastics...

A while back I saved & sent one out for one of the other lads on here that collects.

Have you not got an intega in your tat collection ?

You'd never be brave enough to go to Wakefield it's that rough even the muggers have to go out in pairs....

looks like pete ?

2005ish we did some flats you won't be replacing a 2nd floor ewd of a ladder... My person fav was end stations needing a triple ladder for access !

the recommenced minimum height is 3m ? having to stand on a leaded bay was not uncommon however- working on this can't ready be done safety off a ladder?

ask & the bsia will send you a access, cctv & intruder book as samples

an unsed TS700 with mains on the pcb, vintage.... @logan was you after this sort of tat https://www.ebay.co.uk/itm/Burgalr-Alarm-PIR-Sensors/283617313078?hash=item4208e8c136:g:-JcAAOSwP-pdgQ8M or was it the earlier ones

& Philip the Greek

I drink in Queens....

I believe you can edit the registry on your XP / Win 7 machine so it an "EPOS terminal" & continues to receives updates from windows

OP - Prying the case apart at height is pain, getting it to close again is pain... Have fun.

is that meant to match the panel diagram ?

err Yea I too think a pic the circuit board help greatly to guess its age

I thought he'd moved, further inland, towards the rear so to speak...

xm6 ? why not an optima + much rarer

you've ruined the punch line...

the rep showed me the plastic cased ion & a dongle, I knew where they got the dongles form them from & asked why I should buy there's, they run really hot at 12v & they where concerned at the fire risk (IIRC)

you ginger ?

the 9800 was in the market place in the late 1980's.... rkp, digi footprint, priner outputs... 30 odd years later- this sort of tat still selling well.