MrHappy

I did minor roof repairs in the summer, it much easier when its nice & sunny At the weekend I'm in the office & also on the tools

& then spend a week or so on TSI trying to get it going...

my cost for an employee to do the job would be £235.00 +vat (£282.00) To register it on an a cloud a/c for you £50.00 +vat (£60.00) There are ways of making it more profitable, however something as unlucky as getting a screw in a tyre or returning for warranty repair would take any margin made

Default it & reprogram it Personally I'd bin it & fit something new

call a local small co. however if you want to prat about, either z12 need programming out, or z1 & z2 are open ? I'd assume the full system requires programming correctly ?

I'd assume your existing controls are too old for the wifi card I assume your getting new controls with a wifi card & all the existing items reprogrammed onto the the new system, If you don't want to the installer to have access to the system...... I could set the system up that way for an additional cost & you can sort your own billing out & have your own responsibility to administrate it. There's very little money in replacing the controls or selling you an app subscription.

I have a old HP Poe switch, J8164a purchased of ebay for couple of hundred quid yrs ago, HP is used by one of my bigger clients who have a proper IT team. My only issue is java support for web browsers Unless cheap tat I'd guess your ports are prioritised, yours droping off may be the total load of the switch is too high & its closes down ports to keep other open ?

is this a managed switch ?

They need securing correctly & careful adjustment to ensure they don't FA

a 2nd user draytek off eBay is what I'd try

Al, @fermevc has only made one post & we've already worked that out & he's clearly a proper alarm man unlike you

sounds like you've ****'d up ?

lol,

I'm not sure what the topic is.... however

If don't complain your unlikely to get a cert, chances are the SSAIB want you to complain are they paid for every cert issued

One of mine on fully inclusive servicing contract

sooner or latter the control will go tits up...

they're not very nice to work with, either leave it to shut down & walk back into the rm & when it transmits it will clear the tamper, or view the signal strength in an eng menu or delete the tx & put it back on they get unstable with age

Looks like a thin sprayed coating I recal recall aritech ones filled with resin Dragon ? with thin coating & ADE one with a even thiner coating Google images have very few pic of bell mods

modules started to become old hat in early 90's when interga's ect came to the market with 20min cut off timer (£10 but out stock)

Four core & + _ Tamper Return - Bell Trigger Would have how the Module would have been fitted back in the 80's ?

its almost like the panel is able to measure circuit resistance...

you have EOL selected in the devices but circuits wired as DP ?

your detection devices are either wired wrong or have the wrong value resistors placed or selected..

never seen anything or heard of this co. before, however 01297445 REVDUN ELECTRONICS LIMITED Dissolved 22/05/1993 01907384 REVDUN SECURITY PRODUCTS LTD. Dissolved 06/11/1990 Google throws up your topic on here about a panel & a linkdin page which say they where in Birmingham ?