MrHappy

isn't pdf is newer than the product?

Report is dated 28/01/17 06:30 But has signals after 06:30 Appears to be no restore to Pstn fault before break in ?

Sub has G2 radio alarm with 1st year free app signalling... I'd bet £5 on an external meter cabinet or fibre / telephone being accessible

Or let the user change all the functions & listen to them bitch when there's no recording of the crime... Even better when their employees have done this steal...

Your underinsured by 85% ? Assuming there is something very wrong with the alarm, what does your contract state in regards to maxuim damages? Something like 10 times the value of the alarm ? Your alarm co. will have a comphesive specialist insurance cover for this type of event, what do you have other than the Arc report ?

Sent from my iPhone.....

so, a reflex pir on average house alarm circuit will read around 20Ω measured at the controls. whats on these problem system eg - 3 keypads, 2 external sounder sounders, 7 pirs, 4 door contact a PA button & sound bomb ? you sealed the hole in the pir case & where the cable enters cable come though the hole ? you measure induced ac ? these reflexes on brackets or screwed to the wall, how many screws are you using.... whats day / alarm current ?

It's very unlikely to be the controls. Describe one these problem systems & all the items on it...

note the pre 1993 phone no.

gonna be horrid & say- if they was a decent client they would not be aubile only & without a maintainer

no, either replace the controls or look for new old stock on ebay

iirc 4 for data + 2 for power if you only have 4 you'll need to power locally

what tat brand are they selling at the moment ouch, you call Pricey Alarms Ltd;

I don't think anyone uses them in the UK ?

If you've ever sold old junk on ebay you'll soon reach the conclusion it's more hassle than it's worth

Top end £15 Inc carriage

yes, replace battery if needed & http://www.actmeters.co.uk/alarm-troubleshooting/1313-12v-spike-suppressor

if the chip is in a socket you may be able to replace it if soldered to the board, default the system & reprogram, decent battery & 1313 may help if your break it completely there probably another pcb on fleabay

Lionel Blair ?

I'll swap you for a cat turd from the back garden...

free dog walking service...

I assume the tamper return is linked out at the panel?

easier still... remove tamper return in control panel, touch it onto he bell triger bell should ring...

Unit failed, Panel failed, Or wired with strobe & bell output wrong way round.

who knew you could get TSI in the Islamic Republic Of Tehran?