Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,332
  • Joined

  • Last visited

  • Days Won

    124

Everything posted by al-yeti

  1. Twice as much? Nah cost difference is small GSm drops to Can't see why you would have single path only , perhaps it's because I looking at it on house bashing point of view so cost difference to have both is minimal
  2. But I assume the GSM switch over is the advantage yes?
  3. Yeah but I talking about traders lol By the way do you use the hkc GSM/WiFi dual card , is the WiFi part any better than original single WiFi card , as that one drop out a fair bit due to routers
  4. There's a thread somewhere on the dark side about this lol Some say hik drops out but more likely the router WiFi Chinese makes work just as good from eBay Comlit if you got more money And then the discussion started about ring , ring is as easy as it gets Most of them have motion but unless it's sighted well it will trigger on everything, some turn sensitivity right down and say it helps
  5. DIY go for Hikvision hiwatch Hikvision pyronix enforcer Its decent DIY gear being installed by proffesionals
  6. He should have left it in as a doorbell
  7. Geezer I talking about option51 , 17 restart I think you eaten to many samosas the galaxy which has its quirks has this feature and solves the odd bug Stop trying to be an alarm monkey
  8. Ok so you do require a restart , thanks for agreeing, not always of course
  9. I still don't get it The white wire goes to a tamper terminal Then the other terminal should be like led to zero volts unless your using more than one bell
  10. Probably outputs I don't get it why is white going to the other tamper terminal? And where does it go in the panel
  11. Your picture doesn't show where white is connected in bell box end
  12. If there is movement or mechanical problem with the box , with everything normal you should be able to create the tamper if you move the plastics Although it's possible for a bell to be faulty from new I still think might be mounting issue , Have you mounted it to flat brick or something else Is the cable entry from top , maybe it's crushed going into the box Does box lid sit correctly? If not it sometimes looks slightly lifted because base is warped on what it's sitting against so switch is not firmly down Pictures man need more pictures where you live off the A40 somewhere?
  13. So basically they want a system fitted to grade 3 specification with no bell box externally , which is simple you just install it as grade 3 But as they said above not much good for insurance approval as it won't conform totally to g3 All about insurance at end of the day and if it isn't they just want something more hardcore
  14. Doesn't let me look at those files? I meant connect the Tamper so it goes to zero volts or stick the resistor in bell across directly so it's bypassing the bell tampers , not sure if I wording it right ,leave the other wires connected so bell operates and then see if any faults occur Do you have a meter? You could also check the resistance of the cable while disconnected and looped
  15. Pictures Cover on Cover off Side view Bypass tamper at bellbox , and report back how many faults appear One fault or two faults or more So short out the tamper at bellbox end
  16. Blue tamper , can't see what white is doing though Have you got a picture on the 48 side I have feeling your connected to wrong connections
  17. No outputs default? I suppose op probably changed them anyway So this is a deltabell?
  18. Cable fault? Or water has got to it ? Haven't we done all this already with you?
  19. Moped Muppets One time copper was chasing one he drove past me and hid in a school, i directed the fuzz the police in the right direction Knock em off I say
  20. If you say so.
  21. Should work , as these lot know I look after ONE 520 lol , just wondering did you try restarting the panel ? After making changes What other message does it return on rss
  22. Strange , scrap it be serious get new upto date system fitted
  23. All of them can be switched to unmanaged if you know how to use them
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.