Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,545

  • Joined

  • Last visited

  • Days Won

    136

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Did you address correctly
  2. al-yeti
    List zones showing in menu When you added the Rio did you address it enter engineer mode then exit , I assume adding a Rio hasn't changed on the flex then when exiting it says new mod added
  3. al-yeti
    Just try it Worse case if you value the property you will have alarm fixed by an engineer
  4. al-yeti
    Need a refurb somewhere they will have room You still thinking about it yeah?
  5. al-yeti
    Yeah Mr Happy if you need it fixed unless your not near his area , i reckon he be good at the enforcer
  6. al-yeti
    In that case definitely get engineer it will be worth it
  7. al-yeti
    Pyronix enforcer There might be yellow man near you
  8. al-yeti
    There's probably another panel it's connected to or has been removed , so yes good idea to have it looked at
  9. al-yeti
    It's not about user end equipment , issue is backbone network being dropped by EU and u.s , most operators are actually removing some of there equipment dude ........ And your correct they are far from gone plenty of other takers
  10. al-yeti
    DIY install , fault intruder on zone 2 because you haven't set zone attributes correctly so intruder on exit fail set or abort Just a guessing
  11. al-yeti
    If it was all working before then you have a connection or wiring issue , as you don't do it often you probably made a mistake somewhere or cable fault perhaps
  12. al-yeti

    Advice needed

    al-yeti replied to dazzagp's topic in Guest Forum

    Upgrade and bin it ,unless you don't really have value for security
  13. al-yeti
    Huawei are dust in EU/uk Ericsson have released there new modules supporting multiple networks more expensive than huwaei which have been completely dropped for mobile mast infrastructure, mainly following the u.s Not long before something cheaper than hik will be used Hijack dot com
  14. al-yeti
    Not that inferior lol But you could take a cat5 to the camera for the video with some baluns to see if it makes a difference if it doesn't might be PSU issue or something else
  15. al-yeti
    Could be the camera PSU tho
  16. al-yeti
    All junk equipment ? Otherwise could be the PSU for the cameras
  17. al-yeti
    Why not just update the firmware and find out?
  18. al-yeti
    On the run? Surprised he's disappeared , maybe bus driving
  19. al-yeti
    I did a sub job , they provided texecom dualtecs , i mainly use Honeywell dt The texe version probably ok but gave to many fa , had to change them all and all gone quiet Not to say Honeywell are better question for you dudes Do you ever find some properties just don't get on with the some pirs and DTS or simply you stick to one brand and it always works?
  20. al-yeti
    Change all the batteries to start with and any backup battery
  21. al-yeti
    Not enough installs and work?
  22. al-yeti
    What's wrong with it anyway? There's no fault finding guide for it either , most pros don't install them Better get installer back and pay that's the way it is with the agility
  23. al-yeti
    Yes
  24. al-yeti
    Rio should be where you wired in the keypad ab
  25. al-yeti
    Why you keep the cable stripped so short? Strip back more will be easier for you to manage Also generally yes , a&b correct , I haven't really used the flex but the Rio could be powered with single keypad and you could take an aux 12v from panel if it has one to Rio Few ways you can do it can't see pics that well
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept