al-yeti

Fixed

So as above you can switch them in via menu but assume you will need an extra battery pack for it to last Last one I was called to, i wired a bell instead and stuck the wireless box in the outhouse instead

Yep Hi Honeywell wireless can be buggy to , amount of restarts needed sometimes before something clears , bugged panels hanging around texe maybe

Comfort lights on constantly not siren activations Stop sniffing petrol

Ah ok, was going to compare with hkc, they have additional battery pack gives you 24-36 months approx depending on flash rate , otherwise single normal pack will give you 6months

Battery's last long?

Proper

Or your basically using a wireless bellbox and it has no flashing LEDs in general Only option is to put in a wired bell

Can't remember now about that jumper , but if it solves problem then select g2 if it doesn't then put the resistor in correct place

Good thing on test phones is also the polarity switch , goes red or green so by can't blame installer after for wrong connections lol I used to find some engineers get caught on the ringer not realising the test phone acts as a master so will always ring on the extension with number 3 being connected Back to the topic Get a new panel New engineer New company Or new external dialler And your done Reality many alarm panels need to be changed out move with times , some decorate every 10years so a new security system every 10 is good on residential aswell

Do you have any other codes? You probably need an engineer reset , so you need to call someone anyway now

I still got my yellow bt butt phone as they would call it

All makes sense now I had this problem myself not wiring the g3 correctly , had to get mr alarm monkey to help me (JW) In picture you sent there's a link same batt int or ext , you need to select ext Then the g3 module is waiting for power on a terminal meaning another resistor You should have bought the G2 module would saved you lots of time

Confused In list you say z29 Than you say z30 Also battery isn't enabled Which deltabell is this ? You still got the box? With code on it?

Rare though

What you mean set to 24h audible? Y?

Insurance is all nonsense , you don't set they don't pay , you don't maintain they don't pay All false that only insurance approved installers are best , you only really need that for police response nothing else , Try and get installer who is recommended plenty of companies around

Doesn't the hik app allow you to select which scale you want to watch? Me3

2tb and basic recorder you want 8mp What monitor will you use? Your atleast better off buying hikvision , can't see how your future proofing by buying that rubbish

Listen dude Even if the existing dialler doesn't work you can get an external connect to bell output and your done , GSM payasyou or monthly sin of your choice Or rip thing out and get something more upto date as app systems although cost initially only £x per month approx All long winded for no reason

Why can't the dialler work either panel? I assume the panel works otherwise House basher would add a dialler for £200

It will stabilize after you connect the Tamper Also select SCB mode on bell

No The sensor that is activating needs programming correctly as swb has mentioned so that it starts the timer , It's better in this case you get an engineer to do it for you , it will be worth it and he can check the alarm for you same time connections battery charging and so on

So you must have a PIR in hallway which needs it's setting changed, do you have engineer access?

Breaking door down etc What's difference ? How long do police have to respond by?