Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,440

  • Joined

  • Last visited

  • Days Won

    129

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Yes ub3
  2. al-yeti
    So basically they want a system fitted to grade 3 specification with no bell box externally , which is simple you just install it as grade 3 But as they said above not much good for insurance approval as it won't conform totally to g3 All about insurance at end of the day and if it isn't they just want something more hardcore
  3. al-yeti
    Lol
  4. al-yeti
    Doesn't let me look at those files? I meant connect the Tamper so it goes to zero volts or stick the resistor in bell across directly so it's bypassing the bell tampers , not sure if I wording it right ,leave the other wires connected so bell operates and then see if any faults occur Do you have a meter? You could also check the resistance of the cable while disconnected and looped
  5. al-yeti
    Pictures Cover on Cover off Side view Bypass tamper at bellbox , and report back how many faults appear One fault or two faults or more So short out the tamper at bellbox end
  6. al-yeti
    Blue tamper , can't see what white is doing though Have you got a picture on the 48 side I have feeling your connected to wrong connections
  7. al-yeti
    No outputs default? I suppose op probably changed them anyway So this is a deltabell?
  8. al-yeti
    Cable fault? Or water has got to it ? Haven't we done all this already with you?
  9. al-yeti
    Moped Muppets One time copper was chasing one he drove past me and hid in a school, i directed the fuzz the police in the right direction Knock em off I say
  10. al-yeti
    If you say so.
  11. al-yeti
    Should work , as these lot know I look after ONE 520 lol , just wondering did you try restarting the panel ? After making changes What other message does it return on rss
  12. al-yeti
    Strange , scrap it be serious get new upto date system fitted
  13. al-yeti
    All of them can be switched to unmanaged if you know how to use them
  14. al-yeti
    https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F123380932600 These work good for me , as good as 8ways you gave me , but obviously have the gigabit uplinks
  15. al-yeti
    Yes
  16. al-yeti
    If we don't leave EU that UK map won't exist
  17. al-yeti
    Cos the dodgy bellbox in your house you posted , the one that isn't straight , Chris is close to you he could sort it out for you man You need to get serious if you want be in the business long........
  18. al-yeti
    So you need to buy a Rio to expand the wired zones Galaxyguy if your reading? Is flex20 same as g series you can use any zone as wired and wireless If that's correct buy a Rio , expand fully and then do what you have to do
  19. al-yeti
    Why would you do that on a flex 20 List all your circuits?
  20. al-yeti
    Why don't you just have proper cameras and multiple screens There's an installer page here somewhere but mostly for alarms I know guy up north he will do you discount four cams max £3500 What you think? No remaniac remarks please
  21. al-yeti
    They still warp , but the deltabell is ok as long as screw is adjusted , especially on pebble dash of old , some newer pebble dash is worse , or that other rough stuff painted over mostly bumps all over the gaf
  22. al-yeti
    Tighten the tamper screw near switch , this will push the switch tight , you have left it loose if no other problems
  23. al-yeti
    Your funny , i actually edited, hoping you wouldn't have a retort, not realising I didn't edit it enuf Never mess with a monkey eh?
  24. al-yeti
    What green badge? You know I messing with him yeah?
  25. al-yeti
    Just turn it off and remove it end of.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept