al-yeti

Your a proper classic man But well done for keep going and trying we wouldn't lol

Can I see a picture of the main panel board how you wired it ?

I get you man , hardcore burgalar alarm kits like this are beyond me Do you have a meter ? DVM? You can experiment to see what distance the contact closes and opens , although "guessing" a few mm will do If the contact is right next to each other and the zone light still doesn't go out then must be another fault , providing you can prove the contact is working in the first place

But this is DIY section? So he just needs some tips or even a guess lol Ok so if it's working what needs to be setup then?

I thought you could do RF on all the zones like the g2 , your thinking dimension?

You know sparkies hate the comlit they sell it and screw it to wall and get stuck after that , then says it's rubbish

What third parties? You mean like the WiFi connection , broadband and so on itself?

So have you wired anything up yet ? What's the problem with it?

If they could make a Poe version or ethernet only would be better

No Comms in use? Does this mean line is also not connected ? Just wondering

Ring I think seems to fair better but the missing the relay bit , which would then put them on top I reckon , I still don't have one tho lol , probably get a Chinese version with onvif

Your better off with the hik as it will connect to there other systems As a doorbell they are okish but all drop out on WiFi and have lag and all other kinds of rubbish But already the hik will chime your existing wired bell

Did you address correctly

List zones showing in menu When you added the Rio did you address it enter engineer mode then exit , I assume adding a Rio hasn't changed on the flex then when exiting it says new mod added

Just try it Worse case if you value the property you will have alarm fixed by an engineer

Need a refurb somewhere they will have room You still thinking about it yeah?

Yeah Mr Happy if you need it fixed unless your not near his area , i reckon he be good at the enforcer

In that case definitely get engineer it will be worth it

Pyronix enforcer There might be yellow man near you

There's probably another panel it's connected to or has been removed , so yes good idea to have it looked at

It's not about user end equipment , issue is backbone network being dropped by EU and u.s , most operators are actually removing some of there equipment dude ........ And your correct they are far from gone plenty of other takers

DIY install , fault intruder on zone 2 because you haven't set zone attributes correctly so intruder on exit fail set or abort Just a guessing

If it was all working before then you have a connection or wiring issue , as you don't do it often you probably made a mistake somewhere or cable fault perhaps

Upgrade and bin it ,unless you don't really have value for security

Huawei are dust in EU/uk Ericsson have released there new modules supporting multiple networks more expensive than huwaei which have been completely dropped for mobile mast infrastructure, mainly following the u.s Not long before something cheaper than hik will be used Hijack dot com