al-yeti

ac?

Picture of PCB and wiring ?

Years ago and installer gave me a few boxes of wisdom kits, they sold like hot cakes on eBay As above when new setup by installer will work then go loopy like alarm men

Yeah but some of these routers now lock this to , they would need to buy third-party router

Hassle,,,, I glad they changed that on the hkc , allows manager to update WiFi settings saves a trip if no dual path

Does enforcer allow user to search for new WiFi?

Hot days false alarms , might be also detector issue...

If you work overtime......

What about those that do it specifically https://www.calibrate.co.uk/calibration/

Yeah those were the days , college teacher would have just drawn a circuit designed in there heads and said go get this and make it , and give your the parts list , fun times

Old ones eBay? What if new calibrated meter is flawed or you get cert with that aswell

Yeah g3 needs resistor , he probably has that

Blah It's grade 3 probably and requires the resistor to the positive? That's what I remember from some clever dude in Birmingham told me...👍🏽

Dude you didn't answer the question List the zones and attributes for each zone

I couldn't quite understand above But you can wire the -strobe and -bell together to the -bell on the panel

Lol

Dude forget eol If you wired tamper and alarm , linking the zone clears the led as you say , Does it do that on a zone connected to a PIR? If yes reconnect wires , join the alarm wires at the PIR , does it clear the led ? On setting There's simple methodical approach to this Just like you would fault find on electrics ? Unless your just first fix then I understand your current approach , (current unintended pun but I think I might use it again ⚡ )

The PIR you mentioned earlier doesn't have eol are you saying model is different now?

A small Mr H internet stalker found that jewson was using Chiron for all there 500 sites 14years ago So assume there was a few shekels in it..... Oh and big in Australia 🦘.......

If all the cables took one route then anything is possible If it were me , Identify zone 1 and see what the equipment is at the other end Defaulting is good , but now you need to set each zone attributes Hence why I would link out all the zones and trace them one by one and clear each fault And that's once I know the panel is clear of all faults I can't remember the panel much , but I assume it was a global tamper so loop that aswell Does the external bell work?

Cable faults? If you link out all the zones does that clear the LEDs?

Well someone sees a quick buck to be made and BT see a quick buck to be made without doing much Some will probably stay?

Leave password blank ?

Seems GJD bought them in 2017 probably sacked everyone after that and lost all old data but you never know they might have some info for you

You looking in mirror on a good day? 😁