al-yeti

This is about having a toy amongst three statics lol

Got it, send it over please usual 100year credit limit you give , this is private messaging yes?

You may have two companies in one building three groups Common - only sets of conditions met Floor one - set by first company , also sets common only if floor two is set Floor two - set by second company, also sets common only if floor one is set That's one way of doing it, others will correct me if I am wrong

Groups to set different areas and different times by different users as an example Not to be confused with part/night set

Ah I emailed you, if it gets to you Your funny lol You get green thumbs up for that

Dudes anything you can recommend cheap and cheerful is the word , have a customer with some weird NVR that supports onvif so looking for a small ptz that will work via onvif , or you think that will be a mare? Chinese will do if you know is it works .....

Personally , I am a professional house basher , so I got mad lab setup at home and try everything before going out I havnt used these , but I guessing I prefer the texecom version , more striaghten forward Regarding the terminal if it's just short then no , if there's electronics involved then maybe What about the jumpers have you set them right?

Does it make a difference if you power is connected to out and not in?

Where have you connected the resistor leg?

Bell output blown perhaps do you have a meter

V- holdoff V+ holdoff St- stb S- bell Tr rtn

Mask fault is fixed though yeah?

Nah , best ones leave it to user reset all the way

Not that I know but guessing System - engineer Tamper - engineer PA - manager Line Fail - user / manager / engineer on some Fault - depends on fault AC Fail - user Not that a house basher is affected much by it either

what's model number of ptz then?

Put a loop on global tamper , and as jw said loop out every circuit to see if anything changes , then add each zone circuit back one at a time

Try linking the tamper circuit , close everything up and see if it starts to arm

?

I knew that was coming though, come on seriously, I can't sleep much and spend time getting depressed on Tsi only to find it's offline because you won't give it to a real host in Brighton Does it have an automatic reboot facility so it can miss it's usually crash behaviour

When you going to put Tsi on a real server?

Don't know but this is same user manual https://www.google.co.uk/url?sa=t&source=web&rct=j&url=http://www.responseelectronics.com/downloads/1364919901Optima_G4_Panel.pdf&ved=0ahUKEwjoz87w7fbTAhWGBsAKHdA2Bf8QFggdMAA&usg=AFQjCNH-dThvAV2k98y5HqpP-ImVP2oNCg&sig2=JSWwiWuK5aOUF444kVrq-Q

Well the compact was the same as the late accenta 8 as far as I know and you must have a duff panel

Try http://www.thesecurityinstaller.co.uk/community/files/file/4-accenta-8/

Any of this work? To Set the System From the Day mode. Enter the four digit user code. The system will start to Set Program 1. If another Program is not selected, Program will arm according to its exit mode. To Set a Program From the Day mode, enter a four digit user code. The system will start to Set Program 1. Press Prog followed by the Program number to be Set. A series of beeps will be produced acknowledging the Program number and the Program will start to Set according to its exit mode. Faults During Setting Faults are shown by the zone indicators, accompanied by a broken beep tone, one beep for zone I, two beeps for zone 2 etc. All exit timers have their timer periods halted whilst zones are in fault. To Omit Zones Enter a 4 digit user code and if required, select Program 2 or 3. Press Omit, the exit tone will stop and the zones that are about to be armed will be displayed. Key in the zone number(s) to be omitted which will flash to confirm selection. (Zones which have been programmed as omit prevent will give a reject tone). When the selection is complete press Set and the exit tone will continue. To Quick Set Pressing Set during the exit period will cause the exit tone to stop and the system to Set within about 5 seconds. To Unset the System Enter the user code and the system will return to Day mode. If the alarm has been activated then entering the code will stop the alarm and the cause of the alarm will be displayed, Press Reset to clear the indication and return to Day mode. Codes The user 1 and user 2 codes are 4 digit and can be set to any number from 0000 to 9999. They have the same operation for testing, Setting and Unsetting. but user 1 code which is usually considered to be the 'Managers' code has the authority to add, change or delete the user 2 code. To Change User Codes Press Prog then enter your user 1 code, Press 8 to change user 1 code or 7 to change user 2 code, then enter your new 4-digit code. Press Reset to return to day mode. Keypad PA Keys 4 and 9 on the control panel and remote keypad are PA. If these keys are depressed together. a full alarm condition will be generated. Chime Press the Chime key followed by the number of the zone/s required to chime Or Press 0 to cancel all chimes, after a few seconds the system will automatically Return to the day mode.

What you want to do on it?