al-yeti

So had nothing to do with what you originally said

You lot that rough?

Model of alarm ? And pir ? Do a few posts so you can upload pictures But could be you need master or engineer reset, or you dropped a spring , or tamper broken etc

Doh I never noticed but then never needed to use it on them either , simple house bashing

Tough book is great, throw in , throw something on top keeps going, used one though , new quite expensive

Link? G2?

He means get an alarm engineer to help, (approved lol) as you say occupational hazard , but sometimes leads to problems you can't normally solve So if it's an engineer reset then you are stuck , it may require code reset reprogramme and so on Thing is if you have it fixed then you should also charge the customer for its reset , as you only want someone to clear tamper and put it back how it was , customer might get cheeky and say we will use it then As above its an expander issue so you havnt worked it out correctly , opening more covers on an old systay make matters worse

Is it faulty? Looks handy kit

Must be G , he been on fire long time and can't rember galaxy

Exit engineer and use default manager code , rules say I can't tell you that but isn't hard to find

Or in 51 look for reset manager code then use default manager code to set users up

You need galaxy user lol Does menu 51.17 have a defaulting option ?

Have you tried default user codes? As you got the default engineer code I assume , or it was given to you so you should have a managers / user code

Use user code So you got this hooked up to your room and experimenting?

Ov to the tamper Although new bel might not solve your problem , example if you bypass the bell tamper , then get a new bell reconnect cable and you still have a bell tamper then what? Maybe you need something else apart from a bell

+10

Get yourself a budget of £2.5k for Cctv and around £1200 for your alarm All depends what you value everything at

Very common, not sure why though

I like the plug reversal thing haha And of course a big thankyou for another firmware update

Probably because he didn't buy the range finder and guessed, surprising with many systems that this is done , even with galaxy range isn't that good depending what's in the way

Chancer spot taken , very hard to get past those quals

HKC very flexible has minor issues imo What did he slate?

It's decided enforcer is junk but great for the diyer

Why is it powered down?

Basic blag like no guarantees live view or remote playback will always work, and expect delays , allot won't say it at point of sale incase they lose the sale Bit like diallers , having no dial tone, or gsm units losing there signal, all this stuff does weird things especially unmonitored stuff that house bashers put in , but just tell em they can pay more for different services then they will be quiet