Everything posted by al-yeti
-
Asked to fit Yale systems
Standard, could always offer to do it at high labour cost £1000 with no warranty and give your own quote the same time
-
Texecom Veritas 8 system strange fault.
Is bell trigger connected to a pgm? Does veritas 8 have a pgm? Need an ex sparky to answer this
-
Texecom Veritas 8 system strange fault.
The model has chirp? On set Op does it continue or is it a short burst
- engr
-
Texecom Veritas 8 system strange fault.
Maybe there was an exit fault , did you watch the panel while setting or close the door and go out
-
Galaxy G2 1.56 Firmware & Dualcom DigiAir
Yes, so many Yale boxes stuck to those big houses , soon they will upgrade to ...?
-
Missing RIO 102
Doesn't have to be Belden
-
Galaxy G2 1.56 Firmware & Dualcom DigiAir
If they do it others will, which majority do
-
Vehicle
Blagger But I see they carry the Renault engines
-
Vehicle
What engine in the nv?
-
Thinking for others......
Doh , you could hacked off, then angle grinded the bent steel screws off
-
Thinking for others......
Nice , did you hack the old bell off or use proper tools
-
Hd-Sdi Vs Hd-Tvi
Yes old stock , I see allot of offers on ahd , cheap installs all sorts , from what I can see they won't be making to much in the future but who knows
-
Hd-Sdi Vs Hd-Tvi
Am i correct in saying sdi has essentially been killed off like ahd , so won't be available much in the future ? Market leaders tvi and cvi But straight ip onvif still have advantage of compatibility
- GSM Dialler
-
honeywell galaxy keypad
Yes user manual for honeywell g2 is widely available online
-
Reconnect Existing CCTV Cameras
Get a digital volt meter unless you intend to guess , because you have allot info above , have you tried any yet? There's no garuntee there's no faults present on the existing wiring unless you know how to test the cables
-
honeywell galaxy keypad
Use master or manager code or dimension is levels I think
-
Help deciding on new alarm system
Yes man forgot about them, competition for risco
-
Have been a naughty boy
Excellent no points then, I bought a cheetah camera locator after that and still got flashed lots of places haha
-
Gardtec 580 control panel
In that case leave it as is until your ready to change it or get someone in
-
Help deciding on new alarm system
How manufacturers apart from risco and honeywell make a touch panel?
-
Texecom Elite 24 Questions
Although I think you will get stuck programming it , as above you can read it manual , mean time run a cable to every sensor point to get started and bellbox location Com2400 leave it for now will just give you more headache I believe
-
Gardtec 580 control panel
Are you doing all of this just because the display is flickering or other reason?
-
CCTV PSU on a plug top in server rack
Alarm / cctv monkeys? Maybe he means to some kind of standard? Of course hb1671 says it's ok