Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,551
  • Joined

  • Last visited

  • Days Won

    136

Everything posted by al-yeti

  1. Depends on the panel, some of the old ones do this due to no servicing and life span of the nvm which has or may have lost its programming during the powercycle Is it a 9800 or 9600 or newer? Doc probably answer better
  2. If system is setup so zones can be omitted then yes , entering user code and looking through menu for omit , it may come up with no entries, if so then you must call an engineer
  3. If you start selling fertilizer you might find out
  4. Lol , around here £900 for 4cams , hik dvr 8way and those little Chinese domes that cost about 20quid I lose 80% of the quotes
  5. Anywhere lol Don't do much cctv so not much discount either
  6. I see some couriers have notices saying cctv and audio being recorded for security reasons, all within there area of course , not sure if they do record though
  7. Ac theory always did confuse me lol
  8. Problem here would be current then , increase voltage won't give you increase current or have I mixed that up?
  9. The Samsung bullets maybe dual powered, most of them are, same trouble I had so switched to ac psu's , so no need for convertor
  10. Any specific camera model numbers or that varies on hik ? For what you thought was good?
  11. I feel like making a site like that for intruder to, first thing deal with badges!
  12. does everyone have problems with hik vision? Is it cheap brand? Few cameras I have done have been analogue Samsung and a few honeywells both still expensive to buy What hd camera would you recommend ie 1080p or? Standard svr not nvr type
  13. What about the ir, quite dark on edges , how do you get better spread
  14. You need to get out of that office
  15. Could still do with a decent cat5 stapler though , it's rough trying to clip through a loft spaces lol You all using clips? Or p clips? I used some cable ties with eyelets for bunches works ok, or is that a no no aswell?
  16. I experimented on some cat5 stapled on bench perfect every time , soon realised cat5 isn't like 8core doesn't keep its shape aswell , clipped it in the end Also if wood is very soft staples don't hold very well depends on type of wood aswell Is there an adjustable gun? Ie Staple sizes
  17. Possibly as above the relaybhas been programmed to do something under certain conditions or something , if that's possible check what the relay is set to do
  18. 13 downloads

    Installation and programming manual
  19. I in a diff country , but same island as you lot !
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.