al-yeti

Where you buy it?

Just swap the kp Ideally scrap it

You tried stretching the spring a little then close it

They doing you a favour , complete rubbish you just got used to ?

What was other line?

What country are you in and why don't they get another installer?

Nah didn't notice , when in the hood you have to stay alert

I haven't , what you got now ? From Ferrari , jag What else ? Plastic Tesla?

Jags all round......

So your trying to get the alarm to stay working and also get a signal from the pirs to your ha? Short cut meesed up way of doing it , however , you need to upgrade to an alarm that is capable Why don't you just fit the pirs available for your ha , and keep the intruder separate ?

They would have been offered an upgrade by most over the years , but sadly most don't want to pay for it Instead they pay over the years and then the standard comment comes out ,cof how much they been paying over the years could have bought them lots of alarms Reality check, it's been working for years because they have been paying someone to maintain it , and they can't fix it without you upgrading Pay for a new alarm simple.

Or more like this panel is scrap, there is no contract for your alarm system , that seems clear , maintainer wasnt meant as a person who comes to fix it for you on request only..... Scrap it

Hope he ripped off wall and smashed it by now ....... And you went back to your old Nokia

For alarms tampers etc. , I guess you could use an output card , Id bus relay board or op card mini , then there is the zones , if to many zones it might be difficult , zone mapping will help you , have u got engineer access? Then you need enough inputs on Ur ha , unless someone knows hkc is integrated in another way, but didn't think so ..

Well once your wiring deol in the detectors , as JW said you 30+? You maybe find plastics brittle so be careful , if your trying to budget

I would go with anything that also has voice or speech like hkc (although it's trade only at moment( There are.probably others , but if her hearing isn't bad when using fobs she hopefully can hear what it's doing or what an issue is , if one occurred

Scantronic ion 40 will probably do what you want , completely different in programming, but once your up and running you should be good to go If your existing alarm is not working then rip it off and go for gold

Yes

You may aswell fit a Honeywell flex 50 and go with selfmon if this is all DIY , however you may need help with programming

Yes ok , do you have a link to the specific product ?

for monitoring windows?

Dude maybe But your talking to a house basher who wants life simple lol, and customer will pay but let's not get carried away.... Tech zones only so many right ? Or you mean the label the zones and use tech zone attrib However your led option is probably way to go , I will experiment

He wants it to switch when light switches right ? So it needs to activate on a signal , so we can change the word sure but it has to automatically activate the screen to camera when it detects a signal from somewhere

All they want to know , if a window is open , sends some kind of alarm and resets when closed , but multiple windows They said silent , but a small keypad beep would still be ok Would you guys make your own led panel up if they wanted to see status visual without an app , or there is something readily available?

Dudes I been asked to monitor windows only , they don't need intruder , I assume a panel could do this Monitor windows open and closed , send an alarm on an app or desktop to say q certian window has opened First thing that came to mind were 24hr zones, wireless detectors App giving an alarm and status for each one , or even outputs activating LEDs as they want it silent , perhaps a light beep will do Any ideas appreciated