al-yeti

Swb is spot on However if you really want to give it a go Wire it up on the floor or a bench somewhere buy some cable and make yourself a working alarm this way before.installing it After 6months of messing around you can deal with the logistics of doing it Realistically as swb your not.paying the installer to be a labourer , don't forget to order ear muffs if you can't stop the bell ringing , and you probably find resistors in all the existing sensors aswell , or will need to put them in , all is possible Price seems ok to me , I assume he setting up all the accounts for the app system for you aswell.

Default no groups right? Or he says he isn't ....

i dont suppose you can print to screen all you settings lol

what zone are using for the door and what is the zone set as?

If you have defaulted it , it should work out of the box However it is possible that your contact is not working or you have wired it up wrong , so panel doesn't actually see it open and close as such I am guessing as I didn't think it was that complicated on the dimension to get it to set , unless you are setting groups on and so on , however that's probably not the case Picture of your contact would help and your sure you connected the door to the correct zone on the panel You can normally hear the reed click if it's working , if it doesn't tap it, see if timer works (don't smack the glass lol)

Yo

Loop at bell I assume bell is old , these Normally come with manual Yes about tamper Now have you done it yet?????

Or use a relay 5v to switch the led on 12v

And lastly don't forget to tighten your back wall tamper screw , if it has one .......

One leg of the tamper connects to 0v I think look at instructions Take a wire to the eng hold , if you have spare output or you can manually apply 0v I think to it , to hold off the tamper if you ever need to open it in the future You only need to change the batt select jumper to int , to the left , if all of them are currently according to your last picture

Just disconnect the power and battery in the bell first Then goto panel and remove connections there Existing cable should work ,unless your using a four core

Just guessing,experts will be along soon If there have readers fitted , doesn't the system already have a controller with programmable outputs?

Your joker you know I talking about those clad buildings Orisec needs YOU!

There's one in wembley aswell I think ,...

Where that

You switching to orisec?

Classic , probably could have moved the clock if that's real lol

Think it says output panel 1234 of something like that Would be nice if the hkc used galaxy style menu numbering , so much easier lol

As JW your using payasyougo SIM? Cheaper to use monthly and get all events

You mean as SW said , meaning do Sony have onvif......

The spi is handy , I assume you made a backup of the site before doing so , can be handy .....

Your main option is https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/honeywell-galaxy-dimension-spi-key-gd48-p-2078.html Everything else installer based only, however if you can prove to them your an installer it would be different

Lol classic

Welcome to ........the forum

Ok I misunderstood, as I am dodgy engineer who doesn't read things ,I though you meant to answer a call you need to u lock the phone , but yes apps don't unlock phones , I assume a rooted phone with special app would do it , same way trusted devices settings unlock the phone you might get an app that is trusted and phone unlocks when it rings it , not seen the latter tho , or tried