al-yeti

Not sure I agree with anything much I would say more like nothing needs calibration and it throws a tamper error error , I don't actually get it If you mounted then the same way up and nothing has really changed the panel must be giving you a tamper error ????? I assume if you didn't remove the sensor and only tried to change the battery yourself then it also throws a tamper error If you were under a contract and having a service contract etc then this seems all fair For that kind of money don't you have full app control And doesn't the installer have app control ? Where he even as a one man band can disable the problematic sensor for you Depending on what your paying each time you need to change installer aswell , someone who is more flexible and available Ask system to be left as user reset it's not under a contract anyway so why wouldn't they?

Just his terminology

What you mean external keypad is off? Off the wall or dead?

? Cool stuff

You haven't had stair carpet fitted recently have you?

Ag6 though one of worst in weather , and doesn't have scb

Loop bell tamper at bell see if it clears the fault If not Loop bell tamper at panel One will more less tell you what problem is Maybe.....

Probably why Eaton still free they just don't sell enough of it and need higher take up? Who else is still free ? texecoN? Disco?

As above pay alarm man for two visits although the refit is where you really need him provided you don't mess something up

Nice

As said above , you testing the bell by tripping the fuse box means there was another fault Probably the battery which you have now replaced or your battery fuse maybe gone or charge circuit dead , hence why you still get something from the box when you trip it And then additional as above replace bell box

Neither And what's point of no monitoring with light sys? Is that option of DIY install ? Thenlightsys? If your going for DIY option and want self free monitoring, probably the best option is the ion40 from what I can see , just the two examples you gave were not compatible

Pain panel , variations in the programming became stupid Just get rid

Business yes But you definitely not earning enough shekels Maybe you better go work for jb-eye? One man band , sub everything you don't want ?

But best is not easy to install and programme and some is not available to public and so on So with what your already using ion40 is quite a jump up , as the app system is still free , granted some devices one way but it will do for you and making an account is easy aswell when you want to go the self monitoring route which you can't do with a 9651

In your case DIY? Ion40 it's not the best though

Needs new panel , starting to see this often in the 9651 and it will happen again

Nah no embarrassement Good job

Reboot meaning disconnect mains and battery , reconnect mains and the battery in this case

Ok but it's possible I would always wire it in but leave it dissed at panel for my own use , but then don't use those bells much anymore , shame it's not a standard feature on all bells

Galaxy? Or similar using delta with tamper disable connection to an output when in engineers mode , sure it will disable the tamper ......

Lol some.people do that , not witches tho but will remove the nice stuff replace with cheap white read the small print

But smartcon isn't easy for DIY either right?

He won't fight you , he will just take your to McDonald's ....

Lol Ok you finally got me , this is your best quote so far in this forum Chris no offence , don't come looking me cos we are cool right ? (I better keep bat next to my pillow)