Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,332

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Diy , one way scantronic ion range with free app base Everything else will be junk or need installer or tech support Unless someone else remembers anything else Otherwise going to the depths of diy ring?
  2. al-yeti
    Diy?
  3. al-yeti
    It's old panel dude , just like anything else it may do the job if it works for a bit , but realistically I am sure as SW would say not using a Nokia version 1 to post your messages ....... DIY although one way I can only say go scantronics ion which still uses a free based app system and is less complication other systems Others that are free either poor hardware or complicated programming
  4. al-yeti
    Reprogramming it all is best , to make sure it all works to how you want it to, but If you got the budget get rid of it when you can
  5. al-yeti
    Don't you have to set the zones up for part set first? In settings ? Then that might work ?
  6. al-yeti
    Keypad tamper is open
  7. al-yeti
    Lol , I here Sia will fit a decent dimension
  8. al-yeti
    Hkc SIA secure it all https://secureitall.co.uk/
  9. al-yeti
    No from what I know, but I was thinking he wired the loop wrong so back to start
  10. al-yeti
    As above G2-12 or whatever size you need?
  11. al-yeti
    So disconnect everything and close the tamper loop aswell that way you know everything is how it should be
  12. al-yeti
    Nah man that's just odd companies that do that, Different code and lock all panels is best ?
  13. al-yeti
    As jw , but pay him to default codes and lose all support from him or them ....
  14. al-yeti
    You missed some settings If your pirs are not using a common tamper loop you must set the zone eol section on the panel accordingly option 21? And if there was no bell tamper problem previously then you have wired the bell tamper incorrectly , or there never was a bell tamper and you haven't closed the loop , you picture of bell connections before swap and after?
  15. al-yeti
    So the mesh would work? If you place the receiver in an IP box outside each building for the intruder ? Texecom? 25m
  16. al-yeti
    How much movement and why can't you secure them better ?
  17. al-yeti
    Unless he uses ha system which provides that but decent stuff might cost 40k ?
  18. al-yeti
    Depends , if you had remote switch couple of nvrs your wouldn't want a cat5 between them right ?
  19. al-yeti
    All of them?
  20. al-yeti
    Inputs and relay output? So in menu when something on camera is programmed it will or can cause those outputs to activate Crudely speaking , camera 1 video loss, has alarm beeps recorder but switch an out put or relay to do something, maybe trigger another device or whatever you want it to do Experts will correct me when they wake up , get out of bed and get real jobs .....
  21. al-yeti
    So you may as well do ring then right? Although there are a few others who do the door ell and cameras , hik, ezviz(same as him) or whatever it's called
  22. al-yeti
    Keypads probably worth the most if you can wait it out....
  23. al-yeti
    How far ?
  24. al-yeti
    I think your link is correct black intact and the others are cut So has to be a switching issue or incorrect tamper wiring Or your bell trigger is incorrect What happens if you disconnect the bell trigger and close it all up , does it stop ringing ?
  25. al-yeti
    Those connections are in the galaxy 60? So assuming your tamper circuit is always open?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept