al-yeti
-
Posts
9,332 -
Joined
-
Last visited
-
Days Won
124
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by al-yeti
-
Gardtec 840 removing smoke alarms from panel and program
al-yeti replied to Reddwarf4ever's topic in !!..DIY Installers..!!
200 pennies per hour is cheap Stop blagging -
Gardtec 840 removing smoke alarms from panel and program
al-yeti replied to Reddwarf4ever's topic in !!..DIY Installers..!!
Yes it does lol Make zones unused or spare , then flaff around with it and hop you don't blow a fuse or something On a side note put linked smokes and you can still link it to the alarm Doing above means you can remove all of them leave cables as is , protect all the ends incase you have them put back And then fit whatever junk you want -
Enter engineering mode and remove both portal and rio from the system. 2. Exit engineering mode and remove the devices from the config when prompted. 3. Set the RIO address to 2 and add back to the bus. 4. Enter eng mode and menu 72 to detect the device. 5. Add the portal and then menu 72 to detect it. You didn't do this yet tho
-
SW points is better than the mug man
-
I wonder do Honeywell make it this way because they are trying to keep the dimension compatible with the G2 and flex and so on but they still can't get it right for the average DIY user Even complicated for installers
-
Lol
-
Any suppliers give anything away? Firmware not included
-
Gardtec 840 removing smoke alarms from panel and program
al-yeti replied to Reddwarf4ever's topic in !!..DIY Installers..!!
Make zones spare or unused -
He's busy thinking , you know like NASA , busy thinking stuff up , thinking of a backup plan
-
Haha
-
Don't know we need galaxy guy
-
20zones How many zones on the board? You can't have more than 20
-
Your Mrs?
-
Ah yeah I get you You been biting your nails? Forum makes you nervous yeah?
-
What spring?
-
Probably as old keypads were similar
-
Still same with hkc can't use zero lol
-
What movement sensor and led floodlight wattage for 10m height?
al-yeti replied to CYPER's topic in !!..DIY Installers..!!
All the cheap ones normally fail quickly anyway Problem with these units IP rating on the sensor itself isn't very good I do am arf and put a plastic cover over them like a rain sheild works well I want to try the bowls one day ...... -
Try and blag it? Phone them and get through to billing give them system ID and say you want to pay the subscription Once that is done phone back to tech and say your subscription is paid but no access to app They probably don't talk to each other much anyway
-
What movement sensor and led floodlight wattage for 10m height?
al-yeti replied to CYPER's topic in !!..DIY Installers..!!
Draw floor plan and post some pictures -
As above hassle once registered So otherwise anyone can buy a new panel and register , shame that no point having an installer lol
-
What movement sensor and led floodlight wattage for 10m height?
al-yeti replied to CYPER's topic in !!..DIY Installers..!!
GJD pirs? I forget the name of others but also redwall But I doubt you want to spend that much and flaff around integrating those items although gjd is more striaght forward... -
You saying they happy to sell direct?
-
There's a few here in or near there Where r you alarm gorillas hiding ?
-
That was the point , allot of them are still in business but they don't want to pay the rates , so go on forums to find out if there's another way Sorry "op" not targeted at you , I see it often , installers are around but they out of business for the one who doesn't want to pay You could also look for hikvision installers , many of them are doing the enforcer aswell
