Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,332
  • Joined

  • Last visited

  • Days Won

    124

Everything posted by al-yeti

  1. So put new cable in same one , no screen Change galvanised trunking to plastic
  2. Normally balun fault What's voltage at can? Could be the galvanised trunking causing screening?
  3. Looks like it, cut heat shrink off should have a number on it maybe?
  4. I still sell the idea with hkc Pete red tags do well for part set lol
  5. Pet alley mode works well?
  6. https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/intruder-alarm-ancillaries-c-36_46/cqr-8-core-cca-intruder-alarm-cable-p-4052.html
  7. Security warehouse
  8. Yes cable.management is more on hkc stuff aswell in my opinion Galaxy range and texecom have better space to lash it in
  9. Thought steel version has more space Swb?
  10. Just join crimp , solder and extend cables etc You could bury them in wall and put a face plate on top after I would open the plaster up more towards ceiling and fit panel higher up if possible then joins can be inside panel Do you have a better picture?
  11. Nah we just chuck the battery away hope the new one works aswell
  12. Hkc load is good tho lol
  13. Seriously it's good cable
  14. The CCA SW sell cqr isnt bad tho good for house bashing
  15. Dude Simple process for you Swap both keypads round If keypad one works in position 2 atleast you know for sure to an extent the cable power and coms is good Then it has to be addressing and programming or the keypad itself
  16. Check cable then , resistance etc, power etc I thought displaying those details meant there's no coms coming in correctly
  17. You probably haven't closed it or wired it back correctly
  18. I think we need to clone you
  19. I was just think secom with the flashing beacon underneath lol
  20. No know jack about them , everyone here has used them plenty But fastening cables depends on where and how , I still see steel cables above voids , metal trunking in communial walk ways or plastic with d clips or other fixings
  21. As the gorillas here mention , high cameras for overview but only see tops of heads You need some cameras lower to capture the face and better detail Don't worry about vandalism , if someone breaks it just buy a new one lol Houses rarely have there cameras broken by thieves I would say neighbours break them more often lol
  22. Out of curiosity Swap the strobe- and bell- wires at the panel only , do same test you said you did and what is the difference? As swb said maybe tampers not closed or some panels require a resistor on the tamper circuit , I don't know this panel either Ps you sure it's not aG6 bellbox?
  23. Cable fault ? Or panel fault , have you tried disconnecting both keypads put the new keypad on the panel on short cable to see if it works ?
  24. Where you panel? eBay? amazon? Think they have returns policy if bits were missing , maybe it was used panel , although resistors are cheap and programming them out is easier
  25. Nah I have messed up sleep pattern, plus one of kids was not well so night shift But generally poor sleeping habits , haven't done Oncall for anything for years never did that for intruder , only for optical transmission stuff was more of a paid tea break , leave Oncall for the chimps dude
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.