Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,305
  • Joined

  • Last visited

  • Days Won

    120

Everything posted by al-yeti

  1. Not heard of this But is this why hkc Introduced channel selection , or am I thinking if something else?
  2. Cat5e outdoor but buy copper not CCA or you will regret it Ps the hik doorbell try and connect it on a channel first temporarily before buying or running cables so you don't waste your time if that makes sense, of it works all well then get they 8way etc
  3. Either way you have some sort of.lid tamper fault You need skip this alarm anyway
  4. Yes I understand that but I am saying get a new engineer to do this for you Where is engineer
  5. You need new engineer then who can reset it for you, we can't give that information here You sure your not house bashing ? Get new engineer to do it for you
  6. I remember something about that, what device was it when frozen could be bypassed ?
  7. Perhaps give more info Do you mean you installed it yourself or someone installed used am engineer code and then left Why do you want to reset default system if it's just been installed?
  8. What router do you have ? Default the router to factory settings and default the doorbell and try again If you can't get passed the WiFi issue try taking the doorbell elsewhere ms try it on another WiFi router , just so you can narrow down where the problem is Also did you buy this new or used? I would see if the device needs an update of firmware but be difficult if it's not connecting .....
  9. Mine is similar but also has the TDR and DVM built in
  10. Better to move away from honeywell , for DIY texecom and pyronix both sell all there higher end equipment to public at the moment so better of with that perhaps
  11. 8v 1A is the normal rating for a single mains operated door chime in a transformer , or if your using two door chimes then you need a 2amp version
  12. They trigger once and send signal and then you have to wait before they trigger again , but yes don't show open close very well otherwise You don't need it anyway lol
  13. So your alarm has an sd1 connected to it , and alarm has an anticode displayed and wants a new battery???
  14. Doesn't it allow you i to the touch centre setup?
  15. Good point dude , I wonder if it's g3 lol
  16. Vary rare it's changed though Point being try before you default , I think op is a diyers tho or trying to access his own system after messing it up
  17. If you say so dude , i not that experienced in galaxy , but even I can connect rs with a lead before defaulting
  18. Sorry I meant if you don't need access now leave it alone , that way no need to look like a Muppet and sweat if you mess it up When something goes wrong then your ready for it But I would do it on the bench with another panel or are you less than me only one dimension on the books ? I only have one 520 lol Surley you have a panel you can try it on ?
  19. Also do you need access or is system currently working? If working not sure you want to do it at the moment
  20. Be serious man Galaxy guy would know how to deal with this Where r u man? He's probably dealing with an iron brew shipment , hopefully be along soon
  21. So what happens when you enter the engineer code then?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.