al-yeti

Be serious it's gold membership for a reason , problem here is your not installing enough Remember risky risco used offer stuff free ending up charging And texe still has free services for your house bashing level all good eh

You think the wireless sensors are better than wired shock? Taking into consideration the wireless shock can be adjusted on software side ?

messy on windows if they dont let you drill them windows proper

Because programmed not activate bells in fire , you need to.change settings then

Why you haven't explained is what the engineer did to correct it Did he reprograme it? If so then this will happen again at some point If it just corrected itself then again it will happen again probably when your out and someone tries to break in as a worst case As above if you don't look after something , servicing etc then these things will happen Thing is why wouldn't you update your system like you do your phone or computer etc

You mean exit time not ally set by the engineer Do you have access to the engineer menu or have the engineer code? Although the the V2 Tel is a dialler I assume there is another box next to it? Or a picture of your keypad or it has a name on it Or are using the dialler as an alarm?

Now? Lol

This is DIY man we need fuses

Yes

So 20mm glass fuse on eBay look at rating on silver colar

Look at your picture Right hand vertical board at top there is a switch , next to it is a jumper with two small pins , use the jumper to short both pins this will close the tamper If the card was in its own box it would have a spring on the switch instead

Experiment, don't you mean the doors are final exit or something like that Just wondering is that what they called you in for as in main issue?

These are a right pain for this , make it exit route , but it will activate main alarm on coming down 9651 didn't have good options for this bit the silly Billy's

As Mr galaxy said

Because it's in main box fit jumper next to the top switch

Did you fit the spring in the portal?

Find a local house basher to programme it up for you is another option but he might still charge you £250? Perhaps get all your equipment on the wall in each position and then work on a circuit at a time But as swb said this is way over your head , wrong choice of panel really should have bought Yale as a fun project

Also texecom have a help line for diyers

Allocate zones for chime as in turn each zone on and off for chime Can't remember where Iol but it's there

Sounds ok

Correct , with resistors in place Is it a door contact with no tamper ? Good bloke you can then also get an RF card later I believe and have wireless zones , unless you already have that

Don't that's worst mistake Work out which sensors you need on now Think about where you want expander which may just be next to control panel and order one You will just open more fault finding problems trying to get eol working on sensors paired up when you don't need to

So buy an expander as you have a 20 zone panel I thought

How many devices you have in total contacts and pirs