Nova-Security
-
Posts
3,344 -
Joined
-
Last visited
-
Days Won
24
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Nova-Security
-
-
Whats the cable being used for ? looks like a early Fermax riser cable
-
Galaxy flex
-
-
Not been to ifsec for 5 yrs going to the regional ones, Manchester city center and wigan this year.
-
3 hours ago, Andrew1982 said:
and need 5 pirs which are pet tolerent for the dog and cat .
Start by redesigning the system for the cat & dog
-
21 minutes ago, datadiffusion said:
back then including the 5 digit ones that were like 5 typewriter keys in a row, no numbers, in a folded metal case to hide your finger movements.
Replaced one about 3months ago made by BSB
-
in this game if its 8 years old its probably been super-seeded and not made anymore
-
Sounds like a dealership / franchise, i know a few people that got their fingers burnt by a large national, as their sales reps were selling systems to people who couldn't make the repayments and the T & C s were very good to make sure they didn't lose out.
-
Antipassback to stop cards being passed around
-
1 hour ago, btssn said:
So that the panel sees 2K closed and 1K open all is working fine and have programmed and tested.
should be 1K closed 2K open
-
1 hour ago, ElecTech said:
Volt drop will matter as I'll be running the power through the relay 200m away? Power will run from the "panel" through the relay 200m away then back to the LED which is located on the panel... so round trip of 400m...
I'm just wondering if there's a better solution.
Current is 20mA.. LED is the type is fitted on industrial switch panels?? if that makes sense.
Why run the poer to the relay at the contact and back?
Run the contact wires to the panel RB007 trasistorized relay then its only doing 200m
-
Hes using a relay to switch it, so the power must be local to the LED so volt drop doesnt matter. 12vdc 1k resistor
-
remove the speaker wires and check again
-
2 hours ago, Shembo said:
Haha, I make you right on that Galaxyguy. How would I go about testing it? I've 'belled it out' and put my meter on it and it's coming back at under 1k ohm. Does that sound about right for the distance?
56 minutes ago, james.wilson said:1k would be about 1000m on copper cable. 1k is too high imo
But is the above with the 680ohm EOL resistor in place
Or a 1k instead of the 680 ?
-
-
DD, where did you post those quotes from, John Cassie not even seen the post.
-
5 hours ago, ESS said:
couple this with the advances in technology which can now be purchased at a fraction of the cost it was 5 years ago.
Equipment is cheaper now?
Cheap tat is but if your going the proper route with adpro or equivalent then its not, redwalls have nearly double in price in the last 5 years due to bring out a new range.
But the again have seen sites with cheap DVRs and cameras and site site manager checks every now and then.
-
Seen a few guarding companies try and fail
-
1 hour ago, PeterJames said:
Well.....you could keep phoning with jobs that don't tick any of their boxes, that are on the other side of the country until finally they get fed up with you keep pestering them while they are trying to work and add you to the banned numbers on there phone. You did ask and that is the usual story with recruitment agencies
do you want to compare banned numbers list,
No 1 recruitment agencies
No 2 Leasing Companies
No 3 Cheap TAT CCTV distributors
-
Change in direction I reckon.
-
have you made sure that the door contact or how you are monitoring the lock is showing closed (1k), DCM wont open the door if it already showing open.
-
Thought a DCM was looking for o/c going to 1K on the RTE not 2K going to 1K
-
36 minutes ago, MrHappy said:
Le Adt ?
They went ages ago http://www.securitymagazine.com/articles/80968-stanley-works-acquires-adt-france-1
Le Stanley
-
MS and Linkedin
in Members Lounge (Public)
Posted
great way of getting a self updating db of professionals to do a email marketing thingy.