Everything posted by Nova-Security
-
Help deciding on new alarm system
Start by redesigning the system for the cat & dog
- The Mystery Lock?
- The Mystery Lock?
-
Query of unknown name
Sounds like a dealership / franchise, i know a few people that got their fingers burnt by a large national, as their sales reps were selling systems to people who couldn't make the repayments and the T & C s were very good to make sure they didn't lose out.
-
Gym Membership Access Control System
Antipassback to stop cards being passed around
-
Honeywell Galaxy 2-12 Wiring Help Needed
should be 1K closed 2K open
-
LED indication over long run.
Why run the poer to the relay at the contact and back? Run the contact wires to the panel RB007 trasistorized relay then its only doing 200m
-
LED indication over long run.
Hes using a relay to switch it, so the power must be local to the LED so volt drop doesnt matter. 12vdc 1k resistor
-
Galaxy G2-20 Battery Problem
remove the speaker wires and check again
-
Missing RIO 102
But is the above with the 680ohm EOL resistor in place Or a 1k instead of the 680 ?
- Please don't shout at me!!
-
Please don't shout at me!!
DD, where did you post those quotes from, John Cassie not even seen the post.
-
Please don't shout at me!!
Equipment is cheaper now? Cheap tat is but if your going the proper route with adpro or equivalent then its not, redwalls have nearly double in price in the last 5 years due to bring out a new range. But the again have seen sites with cheap DVRs and cameras and site site manager checks every now and then.
-
Please don't shout at me!!
Seen a few guarding companies try and fail
- Hello Everyone from a Recruiter
-
dedicated micros in administration
Change in direction I reckon.
-
Galaxy G2-20 Battery Problem
So he did in post 5 Dose every DIY (as its in the DIY section) have 3 7ahr batteries laying around ? Would have expected to see + Batt Miss
-
Galaxy G2-20 Battery Problem
battery could be knackered, seen batteries with 12v on meter but current reading less than 1amp, cells had gone low resistance, check battery resistance with meter.
-
Cheap Dvr Leaves Your Network Vulnerable To Attack
Should this not be in trade?
-
Engineer Code For Menvier M-Series
Seen one of ours on a list that a certain distributor / manufatory gives photocopies out to people, funny really as its a code we use for a subbie to put in to set a system up, then when we go to commission the site its changed. Not used that subbie since and will never use again as the trust has gone. And we know who it was as every subbie has there own code issued. Agree with that,
-
Galaxy Gold
Galaxy RSS has a place on comms server where you put your UDL code
-
Galaxy Gold
We went to take over a large site with a G3 on it, had engineers code changed by losing company connected up the laptop, and it wouldn't connect. in the g3 panel there is no pace to program the downloader ID or system ID so unless you know them you are not connecting to the panel unless you crash it and reprogram it. When we install a new system them site is then sent to our server which generates a system ID and puts our downloader ID in to the panel, then if we take a laptop to that site the only way to connect to it is to export the file from our server and import it on our laptop. Might of missed something but where on a G3 can you programe the downloader ID ?
-
Galaxy Gold
Password, system ID and site ID required in filled in, if its a new site UDL password will do for G2 but once a G3 connects the software gives it a system ID If you do a automated call via RSS it creates a virgin site and gives the panel a system ID which the only way to get round is to crash the panel, unless you have the system ID
-
Galaxy Gold
We have full undongled version on server. if you go to site and use laptop that has a version installed and try to connect to a panel that has already been connected to by RSS it wont let you even if the UDL password in the comms is the same. Any sites that have been connected to via RSS on server we have to export site from server and import on laptop for it to connect, so there must be something going on. Only have issues with G3 panels
-
Galaxy Gold
I was under the impression it was still licensed, we still have to fill in a form the get updates http://www.security.honeywell.com/uk/products/intruder/control-panels/accessories/programming/466168.html Part Number Description R056-CD-L Galaxy Remote Servicing Suite kit with license R057-CD-DG Galaxy Remote Servicing Suite (Network enabled) with one Dongle R058-CD-DG Galaxy User Management Suite, with one Dongle YY0-0010 Additional 1-user dongle for R057 and R058 Doesnt the software generate a password for virgin sites which is unique to your license number ? And its not freely downloadable.