Jump to content
Security Installer Community

sixwheeledbeast

Global Moderator
 View Profile  See their activity

  • Posts

    8,719

  • Joined

  • Last visited

  • Days Won

    141

 Content Type 

Everything posted by sixwheeledbeast

  1. sixwheeledbeast

    Version Rev G

    5 downloads

    Smokecloak Vali CD zipped. Includes:- Manuals, Firmware, Bootloader, PC Tool, Product Sheets.
  2. sixwheeledbeast
    We are good like that here.
  3. sixwheeledbeast
    CIE Fault is basically the control panel "crashing" and will require a power cycle to clear normally. You will also notice the time resets as well. With faults like this it is best to isolate one thing at a time to diagnose the issue. Personally I would start by ruling out if it is the comms that is causing the issue in the first place. FWIW all the CIE faults I have had in the past have been mains related, mains spikes, prepay meters/MCBs tripping out, noisy equipment on same CU. Does the timing of the issue relate to any changes or new equipment?
  4. sixwheeledbeast
    @OP Do bear in mind the Swann person you spoke to on the phone was part of there "sales team" so his initial interest is pushing his cheap DIY gear, not the Data Protection Act.
  5. sixwheeledbeast
    Montex, I never thought of that. More like setting up your own ARC, I wouldn't call that private reporting personally. Interesting to hear about the push notifications, will this become the new IP speech dialler; time will tell. Do you know if it will require new hardware yet?
  6. sixwheeledbeast
    It doesn't currently do private reporting AFAIK.
  7. sixwheeledbeast

    sudo shutdown -P now

  8. sixwheeledbeast

    14 downloads

    CQR Premia 9 Installation Guide
  9. sixwheeledbeast

    73 downloads

    Eurosec CPX User Guide
  10. sixwheeledbeast

    18 downloads

    Eurosec CPX Installation Manual
  11. sixwheeledbeast

    14 downloads

    Texecom Anticode Software. Veritas, 4 and 6 digit Premier. .exe zipped
  12. sixwheeledbeast
    Yes, if you know how to wire them correctly and you don't overload the panel, as I explained in post 2
  13. sixwheeledbeast
    Generally wired will have "comfort" LED's and wireless will not (to extend battery life). So if you see a wired bellbox with no LED's that would probably mean the system is dead.
  14. sixwheeledbeast
    No part of the system can indicate if the system is armed or not. There can be a system has armed indication but this must only be shown briefly (90 seconds IIRC). So flashing strobe three times on armed for example is ok.
  15. sixwheeledbeast
    Pot, kettle ...
  16. sixwheeledbeast
    I think there pants. Basically an adjustment for the PIR's sensitivity.
  17. sixwheeledbeast
    Same here for our preferred product, I don't see why I am being "mental". Just like you don't do Scantronic we don't do Risk-o, the Rokonet detector was the nail in the coffin years ago.
  18. sixwheeledbeast
    I wouldn't agree, but to each there own.
  19. sixwheeledbeast
    Most good quality quads have background temperature compensation, without having to switch to microwave only. Like http://www.optex-europe.com/products/optex/44-oml-dam/
  20. sixwheeledbeast
    My opinion is if they have got into the premises to use an umbrella or cloak then the protection isn't correct. Masking could be done days before a break in so AM is important here.
  21. sixwheeledbeast
    The brand ACT, however, I haven't seen any other "Anti-Cloaking" detectors. Why do you feel you need anti-cloaking detectors?
  22. sixwheeledbeast
    "ACT" is a Rokonet only feature.
  23. sixwheeledbeast
    Two live boxes could have been too much current and blown something. Most panels need additional PSU's or SCB mode for multiple sounders.
  24. sixwheeledbeast
    Assuming requirements are met, that is.
  25. sixwheeledbeast

    Version 2010

    7 downloads

    Vectus G Class Manual
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept