mcelec

BS5839 talks about adequate support, so the question is, in a closed ceiling space with no access is fixings at 500mm intervals with every second fixing being fire rated adequate, personally I think possibly so. BS7671 on site guide table 4A provides spacing, however this talks about cables in accessible positions, so if the cables are not accessible and unlikely to be disturbed then it is arguable that these minimum fixing spacings are not relevant? I'm looking for some input please.

Morning, I'm out of the office so dont have a copy of the regs with me, I have a site meeting I'm about to go in to and they want to discuss the fixings of cables, as we have flagged up that a sysystem that we are commissioning is non compliant as the cables are fixed every 2 metres. So I need the BS number and reference ideally and the recommended spacings, of the top of my head 300mm horizontal and 400mm vertical normally we space metal ties out further (around every 900mm) and use plastic between, I can't recall what the standards say about this? Any help greatly appreciated.

Hi All, I'm looking for a CCTV sub contractor in the London area to assist with the Second Fixing and commissioning of some IP CCTV cameras (29 in total) 15 internal domes and 14 external domes, all cables are made off with glass ends ready to plug straight in to the cameras which are all POE. We are hoping to get this completed this week if possible, ideally starting tomorrow, the job is in Finsbury Park London N4 3JG If anyone is interested then please contact me for more details, email in my signature below.

Apologies James, just edited my signature now and put it in there

Good evening all, We are a medium sized company based in Parbold near Wigan, we are currently recruiting for a new Service & Maintenance Manager and also an Installation Manager. If you would be interested in either vacancy, you can either email me your details or you can apply via the indeed links below: Installation Manager: http://www.indeed.co.uk/cmp/Solid-State-Security/jobs/Installation-Manager-42a5b05b6446032c?q=solid+states+security Service & Maintenance Manager: http://www.indeed.co.uk/cmp/Solid-State-Security/jobs/Service-Maintenance-Manager-9a7785d0c9c99798?q=solid+states+security

fair enough, at least it on par then with most of your posts

Our office or our website

James, i can try and find out them answers tomorrow as I'm unsure. What I have tried in the past is viewing the URL by using a website that hides your IP address, this seems to work. So I'm guessing (again I'm guessing) that the website has the same IP address as our local server and the same URL name. Really the easy solution would be just to move our website off site?

Yes we are hosting it locally on a server at our office. Unsure about the port, I can ask the question. When you say modify our DNS entries? or locally on each machine? Again sorry for sounding a bit dim!

I'm trying to think how best to explain my problem without sounding a bit thick! When I'm at our office, I can't view our website! We host our website on our own servers, and the issue I think is that our host server has the same URL as our website. So the question is how can we resolve this? Would registering a different URL pointing at the website on our servers work, or would we still not be able to view it? Or would we be better moving our website from our servers? Its a bit bizarre, I'm hoping someone can help, as mad as it seems it is driving me crazy not being able to view our website!!

Thanks guys appreciate the advice, CAME actually have a office in Stockport which is only 40 mins away from us

Hi Guys Thanks for replying, I have spoke with the engineer that went out to site he tried linking out the sensors, Im going to try and get a cost for the ZA4 board and swap that and see how we get on.

Not sure if this is the right place to post...... One of our good clients has asked if we could at a electric gate as a favour, basically it is stuck open. I have sent one of our engineers along he has checked all the usual voltage etc, all appears fine he seems to think it may be the board controlling the gate Quadro Commando ZA4 - does anyone know where you can get hold of one of these and cost? Anyone have any experience on gates have any suggestions? It really is one of them jobs where you wish you stuck to your guns and stuck with sorry we don't do gates