Jump to content
Security Installer Community

Lwillis

Trade Full Member
 View Profile  See their activity

  • Posts

    2,615

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by Lwillis

  1. Lwillis
    Just watch for output 1 inverting when you go into output test. It wont clear until you exit engineering
  2. Lwillis
    Fit an external prox reader on the videofied and ur fobs to set and unset that Or fit a proper CCTV system and use forced door from Paxton or line detection etc onto the NVR Alarm input to generate the alarms
  3. Lwillis
    The PIR going red is because it’s seen movement those have a red LED in them , some have BLUE leds. Contact a local alarm Co. for assistance
  4. Lwillis
    Not without replacing the domes with TVI stuff
  5. Lwillis
    Could you post a screen shot of the footage?
  6. Lwillis
    Aye apparentley it’s the dogs ******** but I’ve never seen one in a decent working order for about 7/8 years now.
  7. Lwillis
    Surely nobody is still fitting these? Didn’t think any of them would be on clients phones for remote viewing. The live images are shocking never mind trying to view one remotely...
  8. Lwillis
    The metal pins inside the glass tube just doesn’t Spring back. Replace the contacts job done
  9. Lwillis
    It's been in about a year I think.... maybe less can't have 0 in the code -Wife won't use system due to that and doesn't want a fob wont take 1k/1k EOLs without fitting extra resistors in the panel Redecorating throughout so fitting a more cosmetically friendly rkp
  10. Lwillis
    Sounds like a plan to me Isnt locked but will need defaulting
  11. Lwillis
    I'm ripping out a 1070 at the weekend if anyone want it otherwise it's going in the bin.
  12. Lwillis
    Yea fit them day in day out and have no issues.
  13. Lwillis
    False alarms mainly ripped a load out in a warehouse and went back to pyronix
  14. Lwillis
    Had nothing but issues with those Honeywell detectors the older ones were better IMO.
  15. Lwillis
    Guessing by your area i might know the alarm co in question. PM me if you get stuck.
  16. Lwillis
    Bit much for a domestic or small commercial tho
  17. Lwillis
    You can but cant disable restores on a G2. Ask EMCS to setup the restores as non filtering and to abort on Open.
  18. Lwillis
    Get the arc to make the restores non filtering
  19. Lwillis
    Could be a few things as above check the psu,bnc ends is it copper cable or the chepo stuff?
  20. Lwillis
    How are they wired? Cat5 with balauns or shotgun?
  21. Lwillis
    I Normally for the 064 didn't think they did the other ones anymore there used to be a NON Prox version for the Euro mini .
  22. Lwillis
    Never took that much notice what variant they were if I'm honest mate.
  23. Lwillis
    I'm sure you could change the banner on the 9651- option 183-IIRC. Havent done one in a while tho
  24. Lwillis
    Not sure the information is in the manual unless you already have the engineer code. As above we cannot give out defaulting information here.
  25. Lwillis
    Agree with James, I'd recommend taking out an annual maintenance contract and have the system serviced regularly, this is more important on wirefree systems.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept