Jump to content
Security Installer Community

Lwillis

Trade Full Member
  • Posts

    2,615
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Lwillis

  1. Here you go. the +&- a post gets in the way a bit and breaks up the thread too much IMO
  2. iphone . was fine before the update tho seems okay on the laptop!
  3. no worries then. its almost unusable on my phone at the moment
  4. both mate, seems to load slower than the old one aswell.
  5. The strobe output is possibly wired into the bell trigger in the bell. Best call a pro in
  6. Is the battery charged correctly. Seems few batteries with reversed polarity on them.
  7. If it's still in fault Enter code and press ent it should say something like"status unset 01 events" Press a and it it tell you what the fault in. +CU/AC is a mains fail Press ent and then esc to reset the system
  8. hi and welcome, there are a few system which can be remotley controlled which one an installer uses is generally down to personal preference. where abouts are you now, there might be a member here who is local to you.
  9. I've got some hightop scruffs, really comfy aswell
  10. Good luck joe. It's allways nice to be appreciated for what you do!
  11. Use a relay on the fire panel to trip an zone input on the castle - program the zone as fire and stup outputs
  12. But surely it would be better to hire a van for the 3 months probation and of it works out sort one long term?
  13. Contact another local installer check the SSAIB or NSI website for a list of registered ones.
  14. Yes they will work with that system.
  15. maybe its goosed, if its panning and tilting and not zooming.
  16. ive Pm'd you some examples mate!
  17. I can confirm the fobs work with the p75 readers aswell.
  18. Am I right in thinking I could create custom forms for use with alarm master ? Populating date from its DB for customer lists and using a custom checklist etc?
  19. That's good to hear. I'll have to download the app and have a look when I get a Minuite.
  20. What's the app like? We've got ours going live next week
  21. I'd rather fit an led fitting and forget about it for 4 years than mess on changing tubes tbh
  22. Lamps? Thought everyone was fitting LED fittings?
  23. Fitted loads of m12's over the years
  24. Wired bell from the output card supplied with the panel. I've grown fond of the delta plus but it does depends on your logo . Mine looks quite good if I do say so myself! Lol
  25. What's the point in fitting 1080p and then recording at 720? We usually setup a schedule or motion recording to increase the time Is drop the FPS to about 8 tho that should be high enough for most situations
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.