Jump to content
Security Installer Community

datadiffusion

Global Moderator
  • Posts

    12,329
  • Joined

  • Last visited

  • Days Won

    110

Everything posted by datadiffusion

  1. Yep I'd never even heard of tftp until I had to re-flash some Siemens (Openstage) IP phones from proprietary firmware back to SIP...
  2. Must have missed this thread. Risko 'budget-budget' range! LOL.
  3. No, but GCHQ are. Well, they are now I've used their name. And MI5...
  4. To be honest I'd trust a £30 John Guess push fit valve converting rising main MPDE to copper / push fit over those hideous Screwfix £7.99 'MDPE one end, 15mm the other' Chinese made valves that most modern houses seem to have. http://www.screwfix.com/p/poly-stop-cock-25mm-x-15mm/86048
  5. Sorry, I only read that last line after I had replied. So I edited my reply not to reply, apart from this bit explaining why I'd edited it.
  6. He has not logged in for 6 years, to this 7 year old topic, so unlikely that advice will be of any help to him. They say the longer you wait for something, the better it is, so can't wait for this one!
  7. In a nutshell sounds like not worth it for a single panel
  8. Get USB Type A to Type B cable, plug A into PC, completely power down mains and battery, plug B into panel, turn on, panel will identify to PC as a different device to usual (i.e with power already on before connecting USB) Run software, follow instructions. I hope those instructions are generic enough not to attract the ire of other Mods, OP, if you are in the trade, I would apply for trade access on here, far more forums with actual stuff going on and we can be far more specific with detail. >>> Read Carefully: APPLICATIONS THAT DO NOT COMPLY WITH THE BELOW WILL BE IGNORED · DO NOT apply for trade membership/access unless you are already a forum member. · DO NOT apply if you are not active in the Fire/Security/CCTV/Access control Industry · DO NOT apply if you have not already made a minimum of 5 posts on the forum · DO post in the public forums while awaiting vetting as this may help speed up the vetting process. · DO NOT apply for trade membership/access unless you have made 5 or more posts. You MUST provide us with at least ONE of the following: - Scanned/photo of your ID card (We wont contact your employer) - Copy of Public/Product Liability Insurance (We will check that this is not fake) - Contact telephone number for your employer AND yourself if relevant and Yell or website details for the company you work for. - Email to us from your trade related domain Read, understood and completely happy with the above? If so then please Private Message (PM) Vetting Click here to PM Vetting Read Carefully APPLICATIONS THAT DO NOT COMPLY WITH THE ABOVE WILL BE IGNORED
  9. Ah, now I get it. But we really did have a meeting about you JW.
  10. Yeah, we deliberately changed the day because it was all about you. Soz.
  11. I know, I get all the Intel briefings at the daily mod chats.
  12. And I can advise you on the best sized ambulance bandage for all your minor or serious cuts and wounds.
  13. Does Texe have global tamper?? I know it has Aux tamper (I think) but that comes linked out from the factory IIRC?
  14. I'm assuming you really mean Alarm 4k7 & Tamper 2k2?? Suspect if not you've only selected single EOL 2.2k...
  15. Is this the London Penthouse Suite Norm Towers or the bolthole in Provence?
  16. I had never seen anything like it, damage wise. I really think it was the undoing of them too, within about 6 months they were gone, shame as they were very nice people and the replacements kept us on the alarm but were not as nice. I mean OK but the last lot would always give you a pot of tea on arrival, ten tonnes of biscuits and a bottle of wine on exit! Still, at least they upgraded to an 816
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.