Hine1789

Yes it is but that is what my old man wants fitted so will fit it. Klkl thanks

Alrite guys i' m back and need your help again. I am wanting to connect another sounder to my panel but this time i have a klaxon sonos 230v one. I connect this the same but will need a transformer to change the 12 v to 230v and also can i wire it the same terminals? I have answered my own question but just.need to clarify. Thanks in advance

Found the problem. The output 1003 was selected as NOT ACTIVE. Changed it to bell and works fine. Thanks guys for all your help

I will check when im back. So it should read 12v when in alarm and 0v when not. Is that right?

This is what I have done... This is what I am connecting to my panel. This is how I have wired it up.

I have checked and not overloaded so I have removed one and left one on to check but the same thing. I have checked the volume and it is on the default volume.

Well i have connected it up but when i test there is no bell sound at all. Am i missing anything

Ah that makes perfect sense now. Thanks very much for your help

See i tried it in +12v and 0v on the SAB part but the alsounders are continually ringing. Any help would be appretiated

Alrite guys and girls, I have recently installed a Honeywell Galaxy G2-12 panel with 5 sensors. Everything seems to be working fine but I have now been asked to install two of the following sound bombs; Quad Piezo Siren Sounder/Sound Bomb for Alarm SystemsI have now hit a brick wall as need to connect these two up. I was wondering whether anyone knows where the two cables go. There is a black(negative) and red (positive) go. Please help and thanks in advance.