Hillbilly

If the system has a wifi/IP module he can dial in and change the code to the default for you??

I would restart router, wait till its back on line then restart panel. Is the ethernet cable a pre made one or did the installer make it? I would test this also just to make sure. The CP-25 was the first panel Orisec bought out around 9 years ago and hasn't been made for the past 4 years or so. You could update the panel to a CP-20 with lan card as that is the updated version?

So the system was installed before???????

Oh it’s going to be a long install!

I meant when it says programme zones go 50 yes.

You need to enter eng code then user code.... scroll to Zones....enter 50 Yes and work your to disable wireless zones etc.

Like all risco tat over time issues like this appear for no reason at all.I had this and had to replace them. Had this issue with a wireless door contact last week randomly tampering and replaced it. It is only in contacts that has been the tamper issue over time.

Bin everything and go wireless!

Looks like the left hand side blue terminals have been screwed down so maybe from there.

How did your sales speech go to upgrade?

But remember we are alarm engineers and that is basic diagrams to us.

So can I get into trade access then please?

Tbh I have just applied for trade side and although been on here for the past 15 years just saw you need to make 5 posts lol. Anyway installed Risco for 18 years through my apprenticeship and the 350 to 800 panels were good hardwired kit. The 595/600/601 kit were decent then Agility/ lightsys brought out.... don’t get me wrong they are decent panels but why make it so complicated for the users to use? plus the engineer programme is nonesense! So the pyronix rep came round and I liked the enforcer. Have quite a few installed and it’s a decent panel only for call outs to the bell tamper switch going faulty! I wanted to use Texecom but they are 3rd party distribution up here so it’s Orisec and it’s the best manufacturers I’ve worked with.

I have been a Risco installer until the past year where we moved to Orisec. just to see if any installers have moved and why to another panel?

There are a lot off installers that install Risco and I used to until I switched to Orisec and use some Texecom. The Agility 4 is a good panel but it has to be set up correctly. I am not saying that the company will not do this but I have been called out to Agility and Lightsys systems where a few adjustments in programming etc have made a difference. Their door contacts/shock sensors are to big which look ugly on doors/windows.