eaglecomputersuk

its already programmed as fault...

but with the diagram is aboved, is working just fine with the 7 cores, bell works well when alarm is trigger without any faults

Can you see the diagram i added with this post? hopefully that gives you a better understanding... I want to remove the aux/fault and wire it as a grade 2, or perhaps if anyone knows where to change the setting on the control panel (Keypad) so it doesnt read the aux/fault as default. Thanks

ON the lcd panel, as soon i connect the power it triggers the alarm, as a alarm

but if i dont connect anything on aux /fault i get a fault error...

Sixwheeledbeast, How can i connect the bell as a grade 2? so that means i would be only using 6 cables

I know... i am pulling my hair now... any advice?

HI, recently complete a intruder alarm foundation course, and soon will be taking the advance. I need some work experience next to someone who is willing to take me on-board, I currently have installed over 12 cctv systems, and I have IT knowledge (networking), I got my own car and tools. I am willing to work for free to gain experience installing intruder alarms. Only small request is to get help with petrol cost and congestion charges if working in the city. I live in Wood green (London) post code n22. I would like to work within m25 (north, east and west London) My email is ##REMOVED## and telephone number is ##REMOVED## I hope I haven't break any rules by posting in here. I am respectful, punctual and follow the employer rules (never give out my number to employers customers or take additional work for me. i hope someone could help me.

Hi, not long ago I completed my alarm course for intruder alarms, but need some experience. Well I need to install a grade 3 texecom premier elite 48, with a pyronix grade 3 sounder, I already have all sorted out off the shelves, but 2 weeks earlier of ordering the panel and sounder, I already run the 6 core cable for the alarm before the premises remodeling took place. Now i just found out that I need 7 cables in order for the sounder to work, because it needs to be connected to aux and fault ports on the panel, and i cant run a new cable since all ceiling is finished. please any experience installer help me with this. I am enclosing the diagram as I have it with the 7 cables, and is working... hope you can understand my trouble. on the manual, the sounder installation is on page 33 INS177-7_Premier_Elite_Series_Master_User_Guide_(2)_4.pdf

Hi, to be honest, I am not that experienced... I had some trouble with the bell installation, and doing only this way it worked for me, if you find the correct installation, please let me know, or anyone in the forum could explain. Also, If anyone could help, its any other way around when I use a 6 core cable? lets say I dont use the AUX and fault ports on the control panel and bell box... Thanks

Hi, i am new to the cctv business, well i being doing it for 2 years now... done about 12 installations already, so i hope i could answer your questions, well this is how i do it... I dont use a app but instead I use a paper template for the cctv survey, where i take notes for each camera that is required or that needs installed. at the same time, i have a laser measurement tool, so i can measure roughly how much cabling or conduit i will need for each camera... At the back of the paper, I do a quick drawing of the floor plan, so i can transfer that drawing later in my office to edraw program for more professional finish. for quotating a use mhelpdesk is a web-base estimates, invoicing. I could use the app on my fone, pc or ipad..for road editing and emailing. i enclosed a pdf file, that looks very similar to mine, but is very useful hope this help anyone, and i look forward to other installer methods to make our life easier. CCTV Survey Form.pdf

Hello, after a long research and attempts I found the correct wiring settings for my pyronix grade 3, so i want to share it for those who may need it too... I done a wiring diagram please note im using the texecom 48 premier and the pyronix deltabell E grade 3. Deltabell E wiring.pdf

Hello, I have a PC technician for the last 8 years, doing networking cabling, and of course PC and laptop repairs, the business is being quite so 2 years ago I started doing CCTV installations, since I had experience on cabling, I choose this path of trade. Now I just completed my intruder alarm course about 2 weeks now, So i bought my self a Texecom premier 48 and a few sensors to practice, with a Pyronix Deltabell E, all grade 3... I hope anyone could give me a hand on this, I plug everything but having trouble with the bell... because is grade 3 it requires fault to an input to the panel, I have connected all the wires but to be honest, I have no clue with this fault ports... at the lcd panel it comes bell 0,0 tamper error... but the cover at the bell is closed. Thats all hope anyone could help me... buy for now