james.wilson

as alyeti spare of the zones ur not using. Gal defaults to all in use for obvious reasons

id was designed for car use, short runs large cable etc. I've run hkc at over 200m leg length with 2 legs in the same 6 core due to 10 device limit

we go the hkc id route. But it means hardware upgrade. But due to the age of the system usually best anyway

yes you can't just put anything anywhere you can damage it

Imo avoid if needed foil is the only reliable way. I've tried all sorts of glass break. They mostly false alarm or respond to their 'tester', made by the same manufacture

i also doubt a factory reset will help

so if its down to cost they are staying? While I agree that something 16 yr old needs replacing the market doesnt

I cant see the panel but is green white reversed?

i also thought it was every year?

its not got a service timer on it?

surely it should but 1 way is cheaper and most people / fitters don't care. Hkc is the best rf I've used

don't know anything about scanny

powermax says 2 way on the spec sheet, but the ONLY device that is 2 way is the keyfob

Id always crash and reprogram anyway

The old castle smart used to flash on low voltage issues. Possible a way of showing ac fail on the dialler? Pretty good idea imo

as above Afaik the devices stay the same you add them as / if needed

hi

also would not have an install manual in non trade

is this a chimp thing?

they will come to you I'm sure

did u have enough posts?

kebab?

let's stop working for a pint

the converters would need to be graded #justsaying

btw dd thanks for for 3k for another year