james.wilson

what do u mean by pricing?

I'm just saying be cautious. Fire is different. You say your are changing conventional sounders? In that case should be a simple swap. But as with all things your last to work on it. As long as your happy to take on all responsibility for the system, then it seems a simple job...

I know its not the answer your looking for but you do know its you that's responsible when working on fire? Even if your working for a company, ie your bit is wrong and people die its prison?

the keypad will wire into the data connections not the circuit connections

did you enable the Doppler bit only?

stalker war? how did he get ur ip?

excellent, crack on then

No movement detector will detect a 'flying brick' A dualtec needs both technologys to activate not just the mic etc. If you had a sensor that sensitive it would be going off all the time. That's fine when all its doing is turning a light on, not so much for an intruder alarm. You need to protect the perimeter as above ie glass break (I hate them) vibration (not advisable on a front high street window, or foil. Id also politely suggest you don't keep saying 'this is simple / plug and play etc' when talking to the people you want advice from and know more than you or you wouldn't be asking.

there should only be one sensor per circuit.

agreed

so you robbed my ppp al

possible but not best practice

agreed a xenon looks better

yes

no in this case it allows the panel to detect if the wire is attacked and someone tries to defeat the sab tamper by shorting to 0v. You need a panel that supports this feature

as already mentioned you only use the nc connection if using the sol resistor. In this case connect to tr (tamper return)

welcome

Hik and pryonix are the same now. Are you looking at using bottom end gear or looking for something better?

I would assume you are correct but I don't know or use the product, there are few pro installers on here that do I'm afraid

each one will give you another 8 but also watch your current usage

I would put a zem in

hello

6wb is the tex guru

id like to offer some but I don't use it. You need info from the pro's that do.

you need to link out T and connect to just the A connections