james.wilson

Thanks You should apply then. Ill do the vetting over pm if you want to keep it that way

Can you buy it from them or is it a licence deal in the uk? What does it cost?

agreed, normans point is the lid fixing screw (not the pcb screw) will be against the ceiling unless its upside down?

qfa Unlikely to be the cheapest

no the lid screw, not the pcb screw

its an eastern European manufacturer but i forget too can it only do contact id, ie no sia 3?

I've just seen looks good

it is proper little ty joe

ty for the feedback

id say its a pir with a range pot but id say vertical in answer to the OP

it looks proper old?

once you get it on..

or anything from b&q, maplins etc lefty

be like script kiddies but using this and walking past the yale boxes

and its on the piss OP as it says 9A/h on it I assume its a nasty battery? Does it rattle when you shake it?

could you do a post on what you think of the miniair. ?

so don't then would be my take

enersys own yuasa iirc

id provide a relay for set status then let the shutter people wire it in

You can find all sorts of stuff that works perfect world, but when its actually needed who knows? you can find info like that here a lot of it doesnt

as a side note I assumed you were passing yourself off as a professional installer. I obviously got that wrong

Jk Do you fully accept liability for what you have done, or did you assume you have no liability cos you did your customer a favour. Id agree that members (including myself) can say things some don't like to hear. When you have an insurance company (not your client) sueing you for poor advice and or professional incompetence you might rethink. But your happy with some of the comments made, unhappy with most it would appear. But it is those ones that will in hindsight be remembered. just to be clear your clients insurance co will want to blame you for 'failure to perform', it wont be your client

Its great imo. Used to swyx which had a better softphone imo but as a pbx I rate 3cx for flexability

not yet I'm pre op