james.wilson
-
Posts
30,639 -
Joined
-
Last visited
-
Days Won
287
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by james.wilson
-
sorry was sarcasm
-
Agreed its a good idea to have something that doesn't work as long as its cheap
-
as I said wire it correctly and it will function, but you need a latching sensor in one place to know which one triggers. Best way is to have a panel that has enough inputs for your detectors. Also get builders to build, get an alarm specialist to do alarms.
-
no don't wire it as it was, id guess its wired parallel. I reakon if you recoonect it and disconnect the other one that one will work. Get someone that knows what they are doing as by the sounds you have had 2 sensors unable to work for 20 years! yes but wouldn't of worked on a break in. A false sense of security is worse than no security
-
'Single Tap' phone line causing issues
james.wilson replied to Utter Tosh's topic in Members Lounge (Public)
appears so -
probably best to start a new topic on it optional extra
-
yes wire it in correctly. and use a latching sensor.
-
so zone 4 used to indicate. When did you last walk test it succesfully Ok id say they have never worked then.
-
has it ever worked?
-
there shouldn't be 2 pirs on the same zone so id guess the person that did it didn't know much and then wired them in parallel?
-
Following on from another thread I will post these pics in the mean time till I connect it up to a panel https://www.securitywarehouse.co.uk/catalog/elmdene-flush-mounted-stainless-steel-16-ohm-extension-speaker-p-5054.html
-
'Single Tap' phone line causing issues
james.wilson replied to Utter Tosh's topic in Members Lounge (Public)
to be fair we don't know. The service co might we'll be correct and its lost in translation. I cant think what single tap might be though without a bit more detail -
Protec Algotec 6400 Commissioning Software
james.wilson replied to manyazium's topic in General Fire Alarm Queries
afaik its licenced and protected -
HKC Quantum 70 RF jamming question
james.wilson replied to IanS100's topic in Control Panels (Public)
yes as above 4g can be an issue, but id be looking at proving the panel with a test system to check it occurs in both panels and yes don't disable jam detect. I have had a 1070 with an aerial fault cause supervision issues. Had to replace the board. -
'Single Tap' phone line causing issues
james.wilson replied to Utter Tosh's topic in Members Lounge (Public)
also when you say 'preventing a reset' what needs resetting is what is displayed etc -
hi
-
so your fitting a Dualcom or will you support windows uwp? no pressure like? redcare is the name all like, its old, I hate it cant do extended
-
I do have videos of redcare vs webway vs dualcom so yes
-
ill do that just after you fit a Dualcom at home... I don't do whats popular I do whats best
-
ta, I'm guessing an answer
-
When do I have uwp windows phone app?
-
you can have ip cams on webway
-
its subscription and yes by the installer
-
Its the webway app https://webwayone.worldsecuresystems.com/knowledgebase/conxtd
-
have you tested the bell output with a metre?
