james.wilson
-
Posts
30,578 -
Joined
-
Last visited
-
Days Won
281
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by james.wilson
-
as 6wb id rely on a multi meter first
-
yes but as it 50v cable lower the insulation test good cable will give 10 ohms per hundred
-
6. <fill in here>
-
whats the upgrade cost??? it will be about 8k less
-
on a serious note whats your beef?
-
press * when selecting the zone type
-
set the input keyswitch and pulse type (enable the * modifier), then just use the switch dc output type on the source panel it will only then arm the other system not disarm
-
from me experience domestics think monthly fees are a rip off (apart from sky, amazon etc) and that a voice dialler is a grade 4 comms device for free
-
no polling or path integrity checking, no audit trail leaving installer open to failure to perform claims on insurance etc etc
-
definitely got a computar zoom lens
-
I might have one in service stock
-
powermax complete proxy tag problem
james.wilson replied to tony123's topic in !!..DIY Installers..!!
you will have to reenroll every device -
when the tamper circuit is ok there will be 0v at the tamper return terminal
-
so you got the cameras from adata?
-
hangon is this adata the one that as provided the camera stuff or at they the it co?
-
no meaning it could be a data problem. As above follow the advice of removing both keypads and use one on a new short temp wire
-
agreed but that needs target camera for audio they tend to use the global output real world stuff not what you ask
-
you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik
-
hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global
-
they may also be worried about bandwidth so slow the fps down and look at an acceptable bitrate
-
ok Yes I think its a good diy option and a panel that will do what you need. Its stable kit but you think a 'spike' has killed your current one But be careful on current load (2 bells in sab mode) and you should be fine
-
bit of advice, don't get funny with those you want free help from but there are bodies that inspect installers I would go down that route first If your going down the diy route give Texecom tech a call they will help you with product choice without using tsi
-
I do think its a bit unfair to get an installer from gumtree then assume pro installers are the same
-
Solar Powered Wifi Camera Installation
james.wilson replied to Ari Toledano's topic in CCTV & Access Control
powerful in a digester -
Solar Powered Wifi Camera Installation
james.wilson replied to Ari Toledano's topic in CCTV & Access Control
no c'mon be serious its a north korea unit vs a bag of walnuts
