Jump to content
Security Installer Community

james.wilson

Admin
  • Posts

    30,578
  • Joined

  • Last visited

  • Days Won

    281

Everything posted by james.wilson

  1. as 6wb id rely on a multi meter first
  2. yes but as it 50v cable lower the insulation test good cable will give 10 ohms per hundred
  3. 6. <fill in here>
  4. whats the upgrade cost??? it will be about 8k less
  5. on a serious note whats your beef?
  6. press * when selecting the zone type
  7. set the input keyswitch and pulse type (enable the * modifier), then just use the switch dc output type on the source panel it will only then arm the other system not disarm
  8. from me experience domestics think monthly fees are a rip off (apart from sky, amazon etc) and that a voice dialler is a grade 4 comms device for free
  9. no polling or path integrity checking, no audit trail leaving installer open to failure to perform claims on insurance etc etc
  10. definitely got a computar zoom lens
  11. I might have one in service stock
  12. you will have to reenroll every device
  13. when the tamper circuit is ok there will be 0v at the tamper return terminal
  14. so you got the cameras from adata?
  15. hangon is this adata the one that as provided the camera stuff or at they the it co?
  16. no meaning it could be a data problem. As above follow the advice of removing both keypads and use one on a new short temp wire
  17. agreed but that needs target camera for audio they tend to use the global output real world stuff not what you ask
  18. you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik
  19. hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global
  20. they may also be worried about bandwidth so slow the fps down and look at an acceptable bitrate
  21. ok Yes I think its a good diy option and a panel that will do what you need. Its stable kit but you think a 'spike' has killed your current one But be careful on current load (2 bells in sab mode) and you should be fine
  22. bit of advice, don't get funny with those you want free help from but there are bodies that inspect installers I would go down that route first If your going down the diy route give Texecom tech a call they will help you with product choice without using tsi
  23. I do think its a bit unfair to get an installer from gumtree then assume pro installers are the same
  24. no c'mon be serious its a north korea unit vs a bag of walnuts
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.