james.wilson

program circuit 2 as entry in program 1

But you have defaulted in since and default is circuit 2 walk through Have a look at page 21 where it talks about programs 1,2 and 3 Id assume your using program 1 as full set and program 2 as part set

Just had a look at the manual you can program circuit 2 to be an entry exit

iirc only zone 1 can be entry exit on the g3. Then gen4 is programmable. But if the g3 can do it you will need to program circuit 2 an e/e

which circuit os the garage on?

what panel do you have?

We used to have a lad here that was awesome on galaxy that also had a hobby on picking locks. He was very good at it. Frightenly good

I didn't say that all pet immune sensors are a bodge, some work better than other but all are flawed. Best way currently is perimeter detection.

or a brick on the tail?

merry christmas

al that joke is literally dead mate

just cos it clicks doesn't actually mean its working, highly likely though

I think its all on one switch but if u heard it click you will need to meter your tr and other tamp circuits

hello

you can use a roller contact but your wanting to use the rf one?

there is id guess 99

master what are you asking?

I reakon the wanted a name change just to discuss stuff, but I'm bitter

no you get it from your local force most are similar but has a few differences it was acpo now its npcc

its a huge advantage of Texecom diynot will cover most things

matt your charges are your costs with a margin. don't do what many do and undercut xy thinking it will work.

hello

short out the circuit, once with wire to see then with the eol

the device does have power?

very few sensors are normally open