Jump to content
Security Installer Community

james.wilson

Admin
  • Posts

    30,537
  • Joined

  • Last visited

  • Days Won

    278

Everything posted by james.wilson

  1. Like the cable skills, but you should curl it a bit like a huge door loop, plus link out the lid tamper if your gonna run the cable that way
  2. its called squark and needs to disabled. as above call ur installer to program it out
  3. me to but as 9651 says needs agreement at any grade
  4. ok i stand corrected i thought that was at g2?
  5. no you can have duress but only at g3 iirc ie if duress is needed then g2 is low risk so shouldnt be needed
  6. Webway, Redcare or Dualcom all on gsm only?
  7. Ssaib.org Let us know next week after you get approved
  8. that's a euro meridian lights and automation can be done on a vanderbilt iPhone?
  9. ire is a basically a reflective count based on the image. Often seen in 0.003 lux at 50 ire. If you have a mirror at x meters gives a 'usable' image. Its supposed to show the sensitivity of the chip way before long exposures etc came into it. plus sync should be 300mv, video should be 700 above sync pulse but its all old school now as that the old PAL system
  10. I wasn't meaning it to come across that way. I prefer to know about issues etc. If it's read that way then I apologise.
  11. no I think its best you prioritise it. The membership here needs guidance and thinks your playing all for your own benefit? seen as you rarely frequent here till you have new info.
  12. cg can you give a best practice tsi members should be doing? to mitigate the issues as much as possible
  13. As above when was it last serviced?
  14. you cant test mesh unless you test every device to location through the mesh. that takes a while from what ive read?
  15. Sorry I wasn't meaning direct mic links. You meaning mic direct links, curvature of the earth?
  16. Ask the questions, make your clients aware and upgrade as a minimum I'd say
  17. Bear in mind WiFi is like old hubs. Be careful on bandwidth. I'd be cautious over 3 cams at low framerates
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.