Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,536

  • Joined

  • Last visited

  • Days Won

    278

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Pm local lads
  2. james.wilson
    Does the g2 have all the access levels?
  3. james.wilson
    db's?
  4. james.wilson
    its called squark and needs to disabled. as above call ur installer to program it out
  5. james.wilson
    pardon?
  6. james.wilson
    thats not 8243 tho?
  7. james.wilson
    me to but as 9651 says needs agreement at any grade
  8. james.wilson
    ok i stand corrected i thought that was at g2?
  9. james.wilson
    no you can have duress but only at g3 iirc ie if duress is needed then g2 is low risk so shouldnt be needed
  10. james.wilson
    Webway, Redcare or Dualcom all on gsm only?
  11. james.wilson
    Ssaib.org Let us know next week after you get approved
  12. james.wilson
    that's a euro meridian lights and automation can be done on a vanderbilt iPhone?
  13. james.wilson
    Hello
  14. james.wilson
    ire is a basically a reflective count based on the image. Often seen in 0.003 lux at 50 ire. If you have a mirror at x meters gives a 'usable' image. Its supposed to show the sensitivity of the chip way before long exposures etc came into it. plus sync should be 300mv, video should be 700 above sync pulse but its all old school now as that the old PAL system
  15. james.wilson
    I wasn't meaning it to come across that way. I prefer to know about issues etc. If it's read that way then I apologise.
  16. james.wilson
    His test desk?
  17. james.wilson
    As above Optex detectors?
  18. james.wilson
    no I think its best you prioritise it. The membership here needs guidance and thinks your playing all for your own benefit? seen as you rarely frequent here till you have new info.
  19. james.wilson
    cg can you give a best practice tsi members should be doing? to mitigate the issues as much as possible
  20. james.wilson
    As above when was it last serviced?
  21. james.wilson
    you cant test mesh unless you test every device to location through the mesh. that takes a while from what ive read?
  22. james.wilson
    Sorry I wasn't meaning direct mic links. You meaning mic direct links, curvature of the earth?
  23. james.wilson
    Ask the questions, make your clients aware and upgrade as a minimum I'd say
  24. james.wilson
    Bear in mind WiFi is like old hubs. Be careful on bandwidth. I'd be cautious over 3 cams at low framerates
  25. james.wilson
    I'd advise covers but I do the same and take em off
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept