james.wilson

you want to use wireless to router or 3/4g?

sla was sealed lead acid. Any cell wil only give a decent reading under some load.

on the g2 only iirc?

yes its a circuit on the gal but still id use technistore

thats it its your sdp but with the device types locations etc as fitted rather than planned, if any different

duracell and panasonic seems to do well

the galaxy supports it directly just enable it

http://www.powerstream.com/cr123a-tests.htm

The problem is a litium cell will loose approx 0.5 - 2% of its capacity a year depending on brand. Couple this with the low power draw of wireless devices the curve just drops of completely very quickly. The difficulty for the manufacturers is at what point do thy report a low battery. Too early and it looks like its running out of batteries, too late and the low battery running time is either very short of non existant. The low voltage volts will depend on the manufacturer and cannot imo be the same for all manufactures. I suppose the answer is to have it programmable so the maintainer can choose when it goes into low battery and how long it will function for in tht state before the supervision failure

means nowt as yu know

would an enforcer perform any better in that way than say a yale? and that's cheaper

technically yes, most councils will give retro planning permission. But as dudley (mine) said depends on the numbers

as h, its an illuminated sign blank ones ok. As such needs planning permission

a volt check means nowt, you never did that on the sla as a good test. Depends on the gear experience will out.

ur not fussed about that?

Hello

Is it a galant?

as 9651 but id say faulty mod

no its a software thing i cant think of the name of either ill have a look

is that the actual keypad or a google. Honeywell had a system before the 2-20 after the 16+

there is that german one. plus ispy as a cheapo option. Genie also rebadged one assuming windows based

id agree

mega pixel too?

id calculate your total bandwidth too as not all switched will handle it on the backplane. you might also need 10GBe to link your switches.

whats your areas for the rest?