james.wilson
-
Posts
30,536 -
Joined
-
Last visited
-
Days Won
278
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by james.wilson
-
Gent Panel Clicking Every 60 Seconds
james.wilson replied to stelmo's topic in General Fire Alarm Queries
Which relay is it. Is it programmed to flick that output as a heartbeat for a watchdog system maybe. I dont know that panel mind to know if its capable -
Gent Panel Clicking Every 60 Seconds
james.wilson replied to stelmo's topic in General Fire Alarm Queries
If I recall this is his own system -
Risco Prosys 40 Will Not Except Gmc Or Installer Code
james.wilson replied to m300raj's topic in !!..DIY Installers..!!
I don't know that gear sorry. -
i use one of these didnt sony back dvd-hd?
-
your there now
-
You will need a nother post to be able to use the pm system
-
Risco Prosys 40 Will Not Except Gmc Or Installer Code
james.wilson replied to m300raj's topic in !!..DIY Installers..!!
Id guess its set for engineer reset on tamper. As it should be. Did you install this yourself? -
Risco Prosys 40 Will Not Except Gmc Or Installer Code
james.wilson replied to m300raj's topic in !!..DIY Installers..!!
It sounds like it needs an engineer reset -
Its in the post above
-
Powermax Detector http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1721 Standalone reciever http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=2126 Then wire the reciever into a spare hard wired zone on the panel
-
You could use a PowerMac one. Standalone reciever and wire it in to a zone input at the powermaster
-
That won't work
-
Can't think of a passive device that would.
-
Hi
-
10 new unfollowers and 39 new followers (hello! hello!) in the last week. Via http://t.co/5owIApqjhi
-
We all like stapled mains cables, this one was bigged up as a #liveinstall too. #tsibodge http://t.co/l3W678H9nz
-
Agreed.
-
We have the skills for security quals.
-
Todays PIR installation comes sponsored by @FisherPrice, we assume one of their junior toolkits was used? #tsibodge http://t.co/nkLMEqHuJO
-
Or just lift the handset and dial 123 during entry time.
-
I believe it won't have a GUI though
-
Its not long till the hdsdi std hits 3 mp with reverse telemetry. As sdi is fairly well supported in broadcast I expect its development to continue
-
You can but id guess the movement in the door would make it impractical. Door loop in the right place. But as a rule a mag on that type of has too much flex in it imo
-
Do you know who are awesome? My 55 new followers in the last week! Growing with http://t.co/5owIApqjhi
-
Re the nest thing. Id agree as a consumer it looks good but I doubt any pros have them over proper stuff.