james.wilson

Also why replace a bit of it, it all the same age. Electronic stuff has a design life of 10 years how old is it all? And the usual question how old is your phone laptop etc

Imo it's the cream that go to uni. If everyone goes it's just another a level. However I was intrigued on the t level. Didn't know if it and seems a good idea

yuo may need a resistor between bell trigger and ho+ something about 10k

Opto relay is electrically isolated can't see the point on board tho unless it's known the board has shit loads of noise on it

Agreed can you post a pic of the panel wiring

That NO isn't a relay is it on the panel?

Never used one but risco seem to be not liked by pro installers.

I don't use it myself as I host but https://support.google.com/mail/answer/7126229?hl=en#zippy=%2Cstep-change-smtp-other-settings-in-your-email-client

some SMTP services are finicky. maybe try Gmail to test etc

It's still a low end end panel. Go for something better. You won't be able to reuse your peripherals so bite the bullet

its still a low end panel with limited programming options. you cant have a timed circuit be isolated in part sets. You need a more serious panel

As above and a licence for it

Agreed I don't know why anyone would have them post 1990

English forum please use it Ta

Sorry I'm not keen on links. Not fussed you list though

I can only assume you have the wrong modules as you say they can't all be faulty

id agree with a battery issue

Ah are you thinking pull up resistor?

sorry I've never fitted one

if there is 12v across the Bell trig and hold off pos and 12v across hold off pod and beg it should be sounding. there shouldn't be 12v across ho pos and Bell trig normally you dont need the resistoer looking at your image as you have trigger monitoring enabled

Have you confirmed the voltage across hold off + and bell trigger is > 12v when triggered. If so id suggest a faulty bell

chnage the zone types to either perimeter or interior An interior zone will only we armed when away Perimeter Zones Perimeter zones rely on detectors designed to protect doors, windows and walls. An immediate alarm is initiated when such a zone is violated by opening the door/window or by trying to break the wall

yes

its in the define zones menu

D6. Interior Zone Interior zones are zones within the protected premises that have nothing to do with perimeter protection. Their most important feature is that they allow free movement within the protected area without initiating an alarm, provided that the system is armed in the "HOME" mode. People can therefore stay at home and move about freely, as long as they do not disturb a PERIMETER zone. Once the system is armed in the AWAY mode (all zones are protected), interior zones will initiate an alarm if violated. So chenge the zone type as required