james.wilson

Id assume you have discconected something. Check your int speaker connections are ok, then the cable with a meter

Wiser heat but i wanted the trv's too Mines connected to home assistant but ive put one at mum and dads on a heatpump

is that for the dualcom badge?

Is that a 3rd party test or self certify. There has been issues in the UK where with one of the regulators failing sites with ajax.

And id add its a strike thing generally (is a whole new post) not in any way a race thing Thankyou for your pm advising ive made that worse ffs im giving up

Public H i dont need or want a muslim strike here

my condolences

as that option no longer complies it probably also needs turning on in the programming menu.

Glad you sorted it Thanks for the follow up

ok id leave the rio where it is and disconnect all the circuits at the rio end and link all circuits with a 1k resistor. Then assuming all show 1k closed change each circuit to 2k one at a time. What do you get then? Is all detection cabling new?

are you sure the resistor values are default on the affected circuits. if the panel is showin a 2k resistance but showing closed looks like programming to me

OK thanks

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/external-sounders-c-36_45_140/scantronic-replacement-battery-for-760es-sdrrext-p-3836.html These ones?

looks rusty on the inside too

If its got a chassis number yes. Put the rotten panels in a barn then your golden Not really

looks effective

ok

i doubt it, is this another one of your bin things you keep on the wall?

this will work for a few months but the battery isnt dead just the timer has shut it off. What it will do when it does start to go flat is anyone guess

wow that bad. I dont think any pro installer will use it yet, but was surprised how ajax did with a self cert. I think any equipment sold to not meet the requirement it claims should be removed and all certificates and insurance revoked

does it comply to en as ajax doesnt

agreed

No the hardware may belong to client. The programming does not. I can only speak for myself but unlocking is free at the office or done on site for a visit cost. Noone Imo should lock the programming without a free unlock option. Ewaste is an issue I'd agree

Ive been looking at crm systems I wondered if there would be any interest for a TSI crm system using suite crm?

agreed but as norman check with your insurer the outgoing co still carries liability. some panel log what programming is changed also.