Jump to content
Security Installer Community

james.wilson

Admin
  • Posts

    30,578
  • Joined

  • Last visited

  • Days Won

    281

Everything posted by james.wilson

  1. no but i dont know or use eaton stuff. If it is a bug then its the maintainer that should update as they are liable for it
  2. not on some they need the door closed at exit start
  3. question OP, if its very important why have you cancelled the support etc on it?
  4. some panels (dont know this one) need to see final door open and close during exit time. If open at the start it wont 'final set' on closing. timed will ignore door state at start of arm
  5. agreed id say it programmed for final door needs to see it open and close to arm. Get it changed to timed exit rather than final door (unless signalling but im guessing not) or start with the door closed
  6. if you start arming it with the door closed then leave is that ok? then if you start it with the door open then close what happens?
  7. when you open the door when its armed do you get a delay? or does it go immediately into alarm?
  8. Big end station is one thing I love, more room for comms etc
  9. I should go back to hosting tsi on Windows nt4 with iis. It works still
  10. It does that to allow full flexibility. You can use anything then off an output. All tones or leds or buzzers or hilos or etc etc same throughout. Other panels tried it with speaker out but missed the fact it isn't a limitation
  11. Is it well old? Might need a restart if the circuit was in use, then went fault before spared off
  12. Yeah
  13. yeah van. I found out when we changed policy a few years ago and i was excluded from the fleet. Assumed i could drive vans on the car policy as its got work listed on it but cant. same with van fully comp cant drive a car third party. WOuld probably pass a producer etc but not a claim
  14. bear in mind using a car policy does not cover you to drive a commercial vehicle 3rd party. ie our vans are insured for any employee to drive on company business. However i couldnt drive one 3rd party on my car cover
  15. im guessing whatever is connected to A3 doesnt work very well? also you have a .5mm 2 core flex whats that doing?
  16. you will need to either provision it from the phone system or program it
  17. Ata converter then will give you a pstn port
  18. You can convert using an ata but may as well get a device that is native, what service?
  19. I'd suggest it's past it. But if you want to keep it I'd bridge the Reed and use the external connections only. But as its the oldest electronic thing in your house it must be time to upgrade or if your not fussed just decommission it You ought to look into wireless polling etc not just assume a signal will make it. The rf environment is way different now than when that was considered good
  20. Brilliant Out of interest what do you reakon on the age of that logo top left?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.