Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,578

  • Joined

  • Last visited

  • Days Won

    281

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    its a good level of detection, I have all external windows and doors with shock sensors and all downstairs rooms have movement sensors. All on their own circuit. 2 external sounders but proper signalling
  2. james.wilson
    you should only have 1 detector per zone/circuit
  3. james.wilson
    too late ive got them and like the convenience but get your point
  4. james.wilson
    thats still an eternity electronics wise
  5. james.wilson
    if its important to you then as Mr H its long out of date, working for the minute you test it is one thing working to rely on is another. Id say the 46xx series went obsolete mid 90's? If its not important then turn it off. I doubt any of the pro members on here still have your system on any support contract. There is a reason for that. One thing is it was a very good system in its day
  6. james.wilson
    to be fair ive got a few of these around the house. Rather than split add them where you need them
  7. james.wilson
    ok then id next be metering the back of the board on each switch to see if the tamper switches themselves. If not it is totally knackered
  8. james.wilson
    im not sure i recall that panel due to age but is the zone light on as well or just the tamper light. Also when you close both tamper switches do you get the tx led to flash on the contact?
  9. james.wilson
    is there links in the connections on the one from the front door? iirc the external and reed are series connections so if there is no link the contact built in wont function either
  10. james.wilson
    we are trying to confirm that the unit has failed. If you put a wire link between each set of the terminals to ensure its not external. Im thinking as the built in reed isnt working your fault is here or external.
  11. james.wilson
    is it an lcd keypad if so you need to post your log history
  12. james.wilson
    Can you post your logs from the time
  13. james.wilson
    No not at all. I'm sure you can appreciate I always want questions I was just assuming there was an overriding issue, sorry
  14. james.wilson
    Op you seem to have an issue due to your last few posts, just assuming based on recent it could be an x y thing. why don't you just ask that question?
  15. james.wilson
    Top reply 6 says it
  16. james.wilson
    Daft as it is this showed up in another search. Must will be loads of keypads not operating correctly, who would of thought a non serviced bit of kit would not work perfectly after 20 or so years.
  17. james.wilson
    cool
  18. james.wilson
    Seen this on ifsec site https://www.ifsecglobal.com/global/thermal-imaging-coronavirus-crisis/ do we think that cctv can be of any use in this? If so is it just for the next few months when its gonna be difficult to install?
  19. james.wilson
    No I didnt lol. I assumed (maybe incorrectly) you had external devices connected to the contact transmitter. If so its those id link out with a bit of wire. Maybe a photo of the unit its decades since ive seen one
  20. james.wilson
    It will till it sends a tamper restore. I'd try linking everything out. Does it have a rear tamper too?
  21. james.wilson
    helmand province?
  22. james.wilson
    so you have external contacts wired into it, have confirmed they are not at fault. Maybe a picture of the external wiring and readings?
  23. james.wilson
    well it will either be 2gb or 32 limit imo. Dependds on the age i suppose
  24. james.wilson
    Yeah it took me a while to find something acceptable at that price point lol
  25. james.wilson
    Whats it use an sd card for?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept